Bedienungsanleitung JBL Cinema BD100 (Seite 7 von 31) (Englisch)

810185

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

www.jbl.com

English

NOTE: See the Connections section, on page 10, for detailed information

about making connections.

Fan vents: These vents are used by the receiver’s fan to cool the unit.

Maintain a clearance of at least three inches (75mm) from the nearest

surface to avoid overheating the unit.

IMPORTANT NOTE: Never block the fan vents. Doing so could

allow the receiver to overheat to dangerous levels.

Speaker connectors: Use the speaker wires supplied with the speakers

to connect the speakers to the proper terminals.

• BD100 receivers have connections for six speakers: front left, front right,

surround left, surround right, center and subwoofer.

• BD300 receivers have connections for ve speakers: front left, front

right, surround left, surround right and center. (The receiver also has a

line-level output for the system’s powered subwoofer.)

See Connections, on page 10, for more information.

Coaxial Digital Input connector: Connect the coaxial digital output of

an audio-only source component here. The signal may be a Dolby® Digital

bitstream, a DTS® bitstream or a standard PCM digital-audio bitstream.

NOTE: Use only one type of digital connection for each source component.

Subwoofer Output connector (BD300 receiver only): Use the

supplied subwoofer LFE cable to connect this jack to the included powered

subwoofer’s LFE jack. See Connecting the Powered Subwoofer, on page

11, for more details about making connections.

Analog Audio Input connectors: Use these connectors to connect

to an audio-only source device (such as a tape deck). Do not connect a

turntable to these connectors without a phono preamp.

FM Antenna connector: Connect the supplied FM antenna to this

terminal.

Optical Digital Input connectors: Connect the optical digital output of

an audio-only source component here. The signal may be a Dolby Digital

bitstream, a DTS bitstream or a standard PCM digital-audio bitstream.

NOTE: Use only one type of digital connection for each source component.

Network connector: Use a Cat. 5 or Cat. 5E Ethernet cable (not

supplied) to connect the receiver’s Network connector to your home

network to enjoy streaming content and content from DLNA®-compatible

devices that are joined to the network. See Connecting to Your Home

Network, on page 13, for more information.

USB Network port (BD300 receiver only): If your home network

is a Wi-Fi® network, insert the supplied Wireless LAN/USB adapter into

this port. See Connecting to Your Home Network, on page 13, for more

information.

• Do not insert a USB memory stick or similar device into the rear-panel

USB Network port. The port will work only with a USB network adapter

like the one supplied with the receiver.

HDMI® Monitor Out connector: Connect the BD receiver’s HDMI

output to your TV’s HDMI input. Since the HDMI cable transmits both

video and audio to the TV, we recommend that you set the receiver’s HDMI

audio output to Off in the receiver’s Audio menu to take full advantage

of your home theater system’s superior audio performance. If your TV is

3D-capable, you can watch 3D content in 3D either from the receiver’s built-

in disc player or from other 3D-capable source devices connected to the

receiver’s HDMI Input connectors (BD300 receiver only, see below).

The receiver’s HDMI Monitor Out connection also contains an Audio

Return Channel that carries a digital audio signal from your TV or video

display back to the receiver. It allows you to listen to HDMI devices that

are connected directly to your TV (such as an Internet connection) without

making an additional connection from the device to the receiver. Note: You

must enable your TV’s Audio Return Channel output. Consult your TV’s

instruction manual for information.

HDMI Input connectors (BD300 receiver only): You can connect

up to two additional source devices that have HDMI connectors to the

BD300 receiver. The HDMI connection transmits digital audio and video

signals between devices, so you do not have to make any additional audio

connections for these devices. The receiver will pass 3D video signals from

3D-capable HDMI source devices to the TV via the HDMI Monitor Out

connector. See Connecting Your HDMI Source Devices, on page 12, for

more information.

Composite Video Output connector: If your TV does not have an

HDMI connection, connect it to the BD receiver’s Composite Video Output

connector.

BD300 receiver only: Video signals from source devices connected to

the receiver’s HDMI Input connectors will not appear at the receiver’s

Composite Video output connection. If you are connecting HDMI sources to

the receiver, you must use the receiver’s HDMI Monitor Out connection.

Power Cord connector: After you have made and veried all other

connections, plug the supplied AC power cord into this input and into an

unswitched AC outlet.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JBL Cinema BD100 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info