Bedienungsanleitung JBL Cinema BD100 (Seite 18 von 31) (Englisch)

810185

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

AUDIO SETTINGS

Audio Output

Speaker Settings

HDMI Audio Out

Dynamic Range Ctrl

PCM

Off

Audio Settings

These settings let you adjust the various parameters that control the audio

output to the Cinema BD system’s 5.1-channel speaker system.

Audio Output: This option lets you set the following items:

HDMI Audio Out: In addition to digital video signals, the BD receiver’s HDMI

Monitor Out connection also carries digital audio signals.

• PCM: This option outputs a two-channel downmix (derived from the

program’s native audio format) via the HDMI output.

• Off: This option turns off the receiver’s HDMI audio output. We

recommend selecting this option so you can take full advantage of the

superior audio capability of your Cinema BD system.

Dynamic Range Control: This setting makes the loud and quiet parts of

music or a movie sound closer to the same volume – a process known as

compression. Compression lets you turn up the volume so you can hear

the quiet parts without the loud parts disturbing other people. NOTE: This

feature works only with Dolby Digital programs that have been specially

encoded. Three settings are available:

• Off: This setting never applies compression. Use this setting when the

volume may be as loud as you desire.

• On: This setting always applies compression. Use this setting when you

want the volume to be as quiet as possible without making it difcult to

hear spoken dialogue.

• Auto: This setting applies compression based on information encoded

within the Dolby Digital bitstream. The receiver will selectively apply

compression only during the most dynamic parts of the soundtrack.

Speaker Settings: This option lets you set the following items:

Test Tone: This setting outputs test noise through each of the loudspeaker

channels in the following order: Left (L), Center (C), Right (R), Right-

Surround (RS), Left-Surround (LS) and Subwoofer (SUB). Use the setting

to check that each loudspeaker is connected properly to the Cinema BD

receiver and to set the distances to the speakers.

Audio Output

Speaker Settings

Audio Settings

SUB

LS RS

IMPORTANT: If you have not yet set the speaker distances as described in

the Quick-Start Guide that was included in the box with your Cinema BD

system, you should use this screen to do so now.

To set the speaker distances:

1. First, measure the distance from the listening position to each of your

system’s speakers, except the subwoofer. Write down these distances.

2. Press the Enter button when the speaker you want to adjust is playing

the test noise and is highlighted on the menu screen. The Level and

Distance adjustment selections for that speaker will appear.

Audio Output

Speaker Settings

Audio Settings

LS RS

Level

Distance

3. Press the Cursor Down button to highlight Distance, and press the

Enter button to select it. The speaker’s distance-adjustment bars will

appear. (Note: You do not need to adjust the individual speaker volume

levels at this time.)

Audio Output

Speaker Settings

Audio Settings

LS RS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JBL Cinema BD100 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info