Bedienungsanleitung JBL CINEMA VISION CVSUB50 (Seite 7 von 12) (Englisch)

809539

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Important Safety Note:

The customer is solely

responsible for proper selec-

tion of mounting hardware

not included with the speak-

ers, and for proper assembly

and installation of the wall

brackets, including but not

limited to the selection of

appropriate weight-bearing

supports and proper use of

the bracket. JBL disclaims

any liability for the selection

of mounting hardware

and/or bracket installation.

Be sure to follow these

bracket assembly and instal-

lation instructions carefully.

If you have any questions or

doubts about your ability to

correctly wall-mount the

speakers, consult with your

authorized JBL dealer or

custom installer.

Prepare the speaker wire as

described on page 8, keeping

the (+) conductor to the left

and the (–) conductor to the

right as you face the wall.

Mount the

attachment

plate into a

wood stud

on the wall,

using three

#10 pan-

head wood

screws at

least one

inch long

(not sup-

plied).

Make sure

that all three screws are

driven into the stud and not

into drywall. If the bracket

needs to be mounted in dry-

wall, the customer is respon-

sible for selecting and using

appropriate wall anchors and

screws.

Making sure to

preserve the

proper polarity

(+ and –

connec-

tions), use the

supplied

termi-

nal

wrench to loosen the red col-

lar of the binding post until

the pass-through hole under-

neath it is revealed. Insert the

bare end of the positive wire

through the hole, then screw

the collar down until it is tight.

Follow the same procedure to

connect the negative wire to

its terminal.

Carefully lower the speaker

onto the bracket so that the

mounting bracket

on the satellite

slides over the

wall attachment

plate until the

metal spring

clip engages

in the

square hole

in bracket

part B.

†† Shown without speaker

attached to bolts.

WALL-MOUNTING

ATTACHING THE CRADLE TO THE CENTER SPEAKER

Important Safety Notes:

•The CVCEN50 cradle is only

intended for use with the

CVCEN50 speaker. Attempting

to use the cradle with any

other model speaker is

unsafe and may result in

personal injury and damage

to the equipment.

•The cradle must be placed

in a safe location, protected

from young children and

pets who might topple it,

possibly resulting in serious

injury. Never place the cra-

dle so that any part of it is

sticking out over the edge

of the table, shelf or other

surface underneath it.

•If you intend to install the

CVCEN50 speaker on top

of the JBL Cinema Vision

plasma television, do not

use the cradle. Instead,

place it on the plasma

screen’s table stand, or,

if the screen is mounted

on the wall, mount the

CVCEN50 on the wall

above or below the screen.

Lower the CVCEN50 speaker

onto the cradle so that it

rests in the curved pedestal.

The metal clip should fit over

the tab at the top of the cradle.

††

CV OM 5/14/04 3:37 PM Page 7

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JBL CINEMA VISION CVSUB50 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info