810152
19
Zoom out
Zoom in
Vorherige Seite
1/35
Nächste Seite
19
lower sensor level to trigger the music reduction. A lower value represents a less sensitive signal detection.
i. Select and edit these values by pressing the Main/Menu knob while Sensitivity Parameters is
highlighted.
. Navigate to the respective channel you wish to edit and press the Main/Menu knob to select.
. Adjust the parameter.
. Press the Main/Menu knob to save the adjustment
. Press the BACK button to cancel this adjustment.
ii. Range is a parameter that tells CH5 how much volume should be reduced when signal detection
meets the desired level.
. To adjust this, navigate to RANGE and press the Main/Menu knob.
. Adjust the parameter
. Press the Main/Menu knob to save the adjustment
. Press the BACK button to cancel this adjustment.
iii. Release Time is a parameter that tells CH5 when it should return to normal volume after signal is no
longer detected. This value is represented in ms (milliseconds).
. To adjust this, navigate to RELEASE TIME eld and press the Main/Menu knob.
. Adjust the parameter
. Press the Main/Menu knob to save the adjustment
. Press the BACK button to cancel this adjustment.
3. FX Processing is where users access the effects parameters, minus sends, of the Lexicon effects engine.
a. The EON ONE MK2 offers a Lexicon effects engine that provides users with Reverb, Delay and Chorus.
i. Navigate to the FX Processing menu in the Main/Menu and press the knob to access.
ii. Here you will be able to turn the effect on/off, edit the main parameters of the effect and access
presets.
b. Reverb by Lexicon Parameters
i. “On/Off
. When set to off, the Reverb by Lexicon input is disabled. When turning this off while active, the
current reverb sound will continue to ring out. To reduce it immediately, reduce the Level To Mix
setting.
ii. “Reset” will set the Reverb by Lexicon to off and adjust the settings to “Room Medium” default preset,
to start over as a factory default.
iii. “Presets” offers users a selection of common settings for fast selection in typical use cases. These
reverb settings are named as descriptions of the types of rooms or halls they simulate.
. Presets assist new users wanting to try quick examples of often-used reverb setting
19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für JBL EON One MK2 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info