Bedienungsanleitung JBL EON718S (Seite 18 von 28) (Englisch)

810149

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

the following position standards on stage:

• Microphones should be behind the front plane of the speakers.

• Microphones should be least two meters to the left or right of the speakers.

• “AFS by dbx” On/Off selection toggles the AFS processor on or off.

• “Reset Filters” will reset all lters, prompting the lters to reset and start over in their discovery of potential

feedback frequency risks.

• The Output EQ is a package of lter adjustments on the main mix before the audio feeds to the amp and speaker.

It includes a collection of easy to select preset curves for common speech and music styles. Each preset can also

be loaded into the Custom preset for detailed user adjustable of output parametric EQ’s. The user has adjustments

for individual band level, frequency, and width (“Q”).

• “Output EQ” On/Off enables or bypasses the current settings in the output EQ processor.

• “Presets” enables rotation of the Main/Menu knob to view and select from the Output EQ presets.

• Scroll the menu to “Presets” and press the MAIN/MENU knob.

• Rotate the MAIN/MENU knob to view the available presets.

• Click the MAIN/MENU knob to load the currently listed preset.

• Users can load the Custom preset, then double click the MAIN/MENU knob to open the Master

EQ editing page. Inside this graph display page you may rotate the MAIN/MENU knob to a specic

parametric EQ number and click the MAIN/MENU knob again to select to edit the gain (plus or minus

in dB), lter frequency, or “Q” (i.e. adjust the lter width.)

• Users can load any preset as a starting point, then scroll down and adjust any setting to load the

current curve as the Custom preset for further editing. A conrmation dialog will appear, warning

the user that doing this will remove the current Custom preset settings and load it with the

currently viewed settings.

• Bass Boost – The Bass Boost functionality adds 2db of bass to the system.

• Bass Boost On/Off enables or disables bass boost functionality.

• Pass Thru XLR output can be set to assist in feeding the mix to additional speakers. This section includes presets

and settings based on the type of speaker the Pass Thru will be feeding and how it is positioned in comparison to

this speaker and the audience.

• “Pass Thru” On/Off” enables or disables the Pass Thru XLR output feed.

• “Presets” enables selection of three types of speakers combinations using the Pass Thru XLR output:

• “Full Range” is designed for feeding another full range speaker. This feeds both this and the Pass Thru

XLR out to another speaker the same full frequency range mix.

• “Sub” preset automatically congures the below settings for isolating low frequencies and only feeding

them to Pass Thru XLR out for a subwoofer speaker. Selecting “Sub” automatically sets the internal

amp/speaker feed to HPF (“high pass lter”) only signal at above 80Hz and the Pass Thru XLR output

to only pass the mix signal below 80Hz.

• “Custom” allows the user to set the lower settings manually.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JBL EON718S Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info