Bedienungsanleitung JBL GX-A602 (Seite 20 von 28) (Englisch)

648485

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

SET THE CROSSOVER CONTROLS

GX-A604: 4-CHANNEL OPERATION

Input Mode switch: Set the Input Mode switch in the "4CH" position.

Front Crossover Filter switch: Set the Front Crossover Filter switch in the “ON” (high-pass) position. This will limit the amount of low-frequency

energy sent to the speakers, significantly reducing distortion and preventing the speakers from damage. Exception: If you have connected large full-

range speakers (6" x 9" or larger) that can handle significant bass to the amplifier's front channels and you are not using a subwoofer in the system,

set the Front Crossover Filter switch to the "OFF' (full-range) position.

Rear Crossover Filter switch: Set the Rear Crossover Filter switch in the “HP” (high-pass) position. This will limit the amount of low-frequency

energy sent to the speakers, significantly reducing distortion and preventing the speakers from damage. Exception: If you have connected large full-

range speakers (6" x 9" or larger) that can handle significant bass to the amplifier's front channels and you are not using a subwoofer in the system,

set the Rear Crossover Filter switch to the "FLAT' (full-range) position.

Rear Crossover control: When the Rear Crossover switch is set in

the "HP" position, the Rear Crossover control determines the frequency

where the low frequencies sent to the speakers begin to be reduced in

volume.

When running the amplifier in the 4-channel mode you should set the

Rear Crossover control according to the size of the speakers connected

to the amplifier channels – the smaller the speakers the higher you

need to set the control to protect the speakers from damage. After

initially setting the crossover frequency, listen to music with strong bass

that you are familiar with. If the speakers sound distorted or distressed, move the crossover frequency control to a higher setting to eliminate the

distortion/ distress. The illustration to the right shows the recommended crossover filter frequency ranges for different speaker sizes.

GX-A604: 3-CHANNEL OPERATION

Input Mode switch: Set the Input Mode switch in the "4CH" position.

Front Crossover switch: Set the Front Crossover switch in the “ON” (high-pass) position. This will limit the

amount of low-frequency energy sent to the speakers, significantly reducing distortion and preventing the

speakers from damage.

Rear Crossover Filter switch: When connecting a subwoofer or woofer to the rear channels, set the Rear

Crossover Filter switch in the “LP” (low-pass) position. This will limit the amount of high-frequency energy sent

to the woofers or subwoofer, improving the clarity of vocals and other midrange sounds.

6" and 5" Speakers 4" and Smaller Speakers

Low-Pass Operation:

Subwoofers and Woofers

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JBL GX-A602 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info