Bedienungsanleitung JBL Intonato Desktop Controller (Seite 5 von 30) (Englisch)

810156

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

Page 5

INTONATO DC Operation Manual

Overview

6. INFO Button

Pressing this button at any time will return to the Info (“Home”) screen. The Info screen displays

monitor volume, aux volume, individual speaker solo/mute indication, clock source, sample rate,

and controller status (clipping, clock source errors, etc.).

7. BASS MGMT Button

This is a global bass management on/off button. When enabled, the incoming signal will be split at

the conﬁgured bass management crossover frequency: the upper frequencies will be sent to the

satellite speakers conﬁgured for bass management, and the lower frequencies will be sent to the

subwoofer(s).

When disabled, the satellite speakers conﬁgured for bass management will receive a full-range

signal, and the subwoofer(s) will not receive any bass managed signal. Note that assigned LFE

channels will still be routed to the subwoofer(s).

NOTE: The state of the Bass Management button is stored to the proﬁle. After a power cycle,

the proﬁle will be loaded and this button will return to its stored state.

8. MASTER DIM Button

Pressing this button will dim (attenuate) the speaker system by the dim level amount conﬁgured in

the Intonato 24 device. The aux outputs will not be affected by the MASTER DIM button.

9. MASTER MUTE Button

Pressing this button will mute all speaker outputs conﬁgured for master volume control in the

intonato 24 device. The aux outputs will not be affected by the MASTER MUTE button.

10. SCENE Button

Scenes are used to select between sources or speaker systems for monitoring, or for monitoring

fold-down mixes. Press the SCENE button then use the NEXT, PREV, and OPTION buttons to

select the desired scene for recall. When the SCENE button is illuminated, the OPTION buttons

may be held to modify the order of scenes in the display. See “Modifying the Scene Order” on

page 17 for more information.

11. SPKR SOLO Button

Press this button to bring up all available speaker outputs in the LCD. Each speaker output can

then be soloed using the corresponding OPTION buttons. When a channel is soloed, all non-

soloed channels will be muted. Pressing the PREV and NEXT buttons will navigate screens to

display additional speaker outputs. Multiple channels can be soloed simultaneously.

12. SPKR MUTE Button

Pressing this button will bring up all available speaker outputs in the LCD. Each speaker output

can then be muted using the corresponding OPTION buttons. Pressing the PREV and NEXT

buttons will navigate screens to display additional speaker outputs. Multiple channels can be

muted simultaneously.

13. TALKBACK Button

When the Intonato 24 is conﬁgured for talkback functionality, pressing and holding this button will

activate the talkback mic for as long as the button is held. When talkback is enabled, the signal

from the Intonato 24’s XLR mic input will be fed to the stereo aux output.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JBL Intonato Desktop Controller Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JBL Intonato Desktop Controller

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info