Bedienungsanleitung JBL On Air Control 2.4G (Seite 3 von 12) (Englisch)

809363

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

READ FIRST! Important Safety Precautions!

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings.

Install in accordance with the manufacturer’s

instructions.

8. Do not install near any heat sources such

as radiators, heat registers, stoves or other

apparatus (including amplifiers) that produce

heat.

9. Do not defeat the safety purpose of the

polarized or grounding-type plug. A polarized

plug has two blades with one wider than the

other. A grounding-type plug has two blades

and a third grounding prong. The wide blade

or the third prong is provided for your safety

. If

the provided plug does not fit into your outlet,

consult an electrician for replacement of the

obsolete outlet.

10. Protect the power cord from being

walked on or pinched, particularly at plugs,

convenience receptacles and the point

where they exit from the apparatus.

11.

Only use attachments/accessories

specified by the manufacturer.

12. Use only with the cart, stand, tripod,

bracket or table specified by the

manufacturer or sold with the

apparatus. When a cart is used,

use caution when moving the

cart/apparatus combination to

avoid injury from tip-over.

13. Unplug this apparatus during lightning

storms or when unused for long periods

of time.

14. Refer all servicing to qualified service

personnel. Servicing is required when the

apparatus has been damaged in any way,

such as power-supply cord or plug is dam-

aged, liquid has been spilled or objects have

fallen into the apparatus, the apparatus has

been exposed to rain or moisture, does not

operate normally, or has been dropped.

15. Do not use attachments not recommended

bythe product manufacturer, as they may

cause hazards.

16. This product should be operated only

from the type of power source indicated on

the marking label. If you are not sure of the

type of power supply to your home, consult

your product dealer or local power company.

For products intended to operate from battery

power or other sources, refer to the operat-

ing instructions.

17. If an outside antenna or cable system

is connected to the product, be sure the

antenna or cable system is grounded so as

to provide some protection against voltage

surges and built-up static charges. Article

810 of the National Electrical Code, ANSI/

NFPA70, provides information with regard to

proper grounding of the mast and supporting

structure, grounding of the lead-in wire to an

antenna discharge unit, size of grounding

conductors, location of antenna-discharge

unit, connection to grounding electrodes, and

requirements for the grounding electrode.

See Figure A.

18. An outside antenna system should not be

located in the vicinity of overhead power

lines or other electric light or power circuits,

or where it can fall into such power lines or

circuits. When installing an outside antenna

system, extreme care should be taken to keep

from touching such power lines or circuits, as

contact with them might be fatal.

19. Do not overload wall outlets, extension

cords, or integral convenience receptacles,

as this can result in a risk of fire or electric

shock.

20. Never push objects of any kind into this

product through openings, as they may touch

dangerous voltage points or short-out parts,

which could result in a fire or electric shock.

Never spill liquid of any kind on the product.

21. The apparatus shall not be exposed to

dripping or splashing, and no objects filled

with liquids, such as vases, shall be placed

onthe apparatus.

22. Do not attempt to service this product

yourself, as opening or removing covers may

expose you to dangerous voltage or other

hazards. Refer all servicing to qualified

service personnel.

23. When replacement parts are required,

be sure the service technician has used

replacement parts specified by the manufac-

turer or that have the same characteristics

as the original part. Unauthorized substitu-

tions may result in fire, electric shock or

other hazards.

24. Upon completion of any service or repairs

to this product, ask the service technician to

perform safety checks to determine that the

product is in proper operating condition.

25. The product should be mounted to a

wall or ceiling only as recommended by the

manufacturer.

Figure A.

Example of Antenna Grounding as per National

Electrical Code ANSI/NFPA 70

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JBL On Air Control 2.4G Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JBL On Air Control 2.4G

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info