810177
6
Zoom out
Zoom in
Vorherige Seite
1/12
Nächste Seite
5
NO. BUTTON Short Press Long press
4 Press to switch
MAP lights based
on sequence:
100% brightness ->
50%brightness -> OFF
Press and hold for
2 seconds to switch
light show patterns
based on sequence:
Rock -> Flow -> Cross
-> Ripple -> Flash ->
Static1 -> Static2 -> Mix
-> DIY -> OFF
5 Press to enter
Bluetooth pairing
mode.
Press and hold for
5seconds to disconnect
all Bluetooth devices
and enter Bluetooth
pairing mode
6 Press to switch
between Operation
mode and Deep
standby mode
7 MAP Lights
6. USING YOUR RALLAYBAR
6.1 Bluetooth connection
You can use your RALLYBAR as an external speaker for your
Bluetooth enabled smartphone or tablet.
1) Press to enter Bluetooth pairing mode.
2) Select “JBL RALLYBAR”, “JBL RALLYBAR S” or “JBL
RALLYBARXL” to connect.
3) Once successfully connected, audio will stream from your
Bluetooth device to this speaker.
BT COONECTION
DEVICES
JBL RALLYBAR
JBL RALLYBAR S
JBL RALLYBAR XL
Bluetooth
Bluetooth
< 10 m (33 ft)
1
2
Off Power off
White (Constant) In operation mode But no
Bluetooth connection
Blue (Constant) Bluetooth connected
Blue (Flashing) Bluetooth pairing
Notes:
This speaker can memorize a maximum of 8 paired devices. The
ninth paired device will replace the first one.
Bluetooth performance can be affected by the distance between
this product and your Bluetooth device and the environment of
operation.
To terminate the Bluetooth-enabled device:
Turn off this speaker.
Disable Bluetooth on your device; or Move this speaker
beyond the Bluetooth operational range.
To reconnect the Bluetooth-enabled device:
When you turn on this speaker next time, it tries to reconnect
the last connected device automatically;
If not, manually select “JBL RALLYBAR”, ”JBL RALLYBAR S”
or “JBL RALLYBAR XL” on your Bluetooth device to start a
connection
6.2 USB Connection
With your RALLYBAR, you can enjoy music that is stored on
a USB storage device such as an MP3 player. Plug your USB
storage device into the USB port of your RALLYBAR. The music
will play automatically. If not, please check if the USB device
contains playable audio contents.
USB CONNECTION

Supported Audio Format
Extension Codec Sample rate Bitrate
WAV PCM 44.1KHz ~
192KHz
< 5Mbps
LPCM 44.1KHz ~
192KHz
< 5Mbps
MP3 MPEG1 layer1/2/3 32KHz ~
48KHz
32Kbps ~
320Kbps
MPEG2 layer1/2/3 16KHz ~
24KHz
8Kbps ~
160Kbps
MPEG2.5 layer3 8KHz ~
12KHz
8Kbps ~
160Kbps
Tip:
1. The speaker plays audio files on the USB storage device from
the root folder to the last level of subfolders in alphabetical
sequence. Up to 8 levels of subfolders are supported.
2. Supported USB Drive File System: FAT16, FAT32
6.3 AUX connection
6.3.1 Aux-In connection
1. Connect a 3.5mm audio cable (not supplied) to:
the Aux-out port of your portable audio device or headunit in
the car.
the AUX-in port of this speaker
2. Turn on your portable audio device or head unit and it starts playing.
AUX-IN CONNECTION
1
Aux-in
2
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für JBL RallyBar wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info