Bedienungsanleitung JBSystems cd 570 (Seite 6 von 26) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch)

161620

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

ENGLISH USER MANUAL

JB SYSTEMS® 7/48 CD570

HOW TO USE …

Most of the common functions are explained in the previous chapter “controls and

functions” In this chapter we talk about the functions that need a little more

explanation.

• SLEEP MODE:

The CD player automatically shuts off the transport and laser after about 15

minutes (when in pause or cue mode). This extends the life of your motor drive and

laser. During sleep mode the display shows the word “SLEEP”. To wake up the

player, just press the cue or play button, the display turns to normal and is ready to

receive instructions.

• RELAY FUNCTION:

Relay play allows consecutive playback for two decks, perfect for pubs etc.

• Put a disc in both players.

• Open the 2 channel faders of the corresponding CD inputs on your mixer.

• Press one of the PROGRAM buttons and hold it down, now press the SGL button

on its left to enable the Relay function. Both the players will be set to single mode

and the track numbers on both displays start flashing.

• Begin playback on one of the two players.

• Alternately a track will be played from both players until the relay function is

disengaged. You can always put a new CD in the player that is waiting in pause.

In this way you can create an endless program, perfect for use in pubs etc.

• To stop the relay function, press the PROGRAM and SGL buttons again until the

track information stops flashing.

• STORING A CUE POINT

Put the player in pause and use the jog/shuttle wheel to search the exact location

for the cue point. Once this location is found, press the PLAY/PAUSE button to set

the new cue point. (the cue led flashes 2 times to indicate that the new cue point is

set and the track starts playing from this new cue point)

Once the cue point is programmed, just press the CUE button to recall it.

• PITCH BENDING:

This function is used to put the beats of two tracks in perfect sync. This can be

done in two ways:

• PITCH BEND buttons: The speed increases or decreases respectively as long as

the PITCH BEND+ or PITCH BEND- button is pressed.

• JOG WHEEL: During play mode the JOG WHEEL will temporarily bend the pitch

of the music by turning the JOG WHEEL clockwise to speed up or

counterclockwise to slowdown. The rotation speed the JOG WHEEL determines

the percent of pitch bend.

ENGLISH USER MANUAL

JB SYSTEMS® 8/48 CD570

SPECIFICATIONS

Power Supply: AC 230 V, 50Hz

Power Consumption: 13W

Output level: 2.0Vrms @ 1kHz

Frequency response: 20-20.000Hz (+/-0.4dB)

THD + noise: 0.01% @ 1kHz, 0dB

S/N Ratio (IHF-A): >92dB @ 1kHz.

Short access time (next track): <2sec

Long access time (track 1 Æ 20): <4sec

Laser Pickup: Sony KSM-213CCM 3spot detection 780nm

Electronic tracking: Full automatic digital tracking.

Dimensions: Main unit 482(W) x 88,8(H) x 262(D) mm

Control unit 482(W) x 88,8(H) x 97(D) mm

Weight: Main unit 5Kgs

Control unit 1,74Kgs

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JBSystems cd 570 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info