Bedienungsanleitung JBSystems MCD 1.1 (Seite 5 von 20) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch)

468033

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

ENGLISH USER MANUAL

JB SYSTEMS

5/36 MCD1.1

7. ELAPSED, TOTAL REMAIN: indicates that the time shown on the display is the track elapsed,

remaining or total remaining time.

8. PITCH DISPLAY: Shows the percentage change in pitch (speed) of the song.

HOW TO USE …

Most of the common functions are explained in the previous chapter “controls and functions” In this chapter

we talk about the functions that need a little more explanation.

 PLAYING MP3 FILES:

The CD player automatically detects if a CD contains MP3 files. The MCD1.1 is able to read several

different MP3 formats but due to display limitations it can’t show the ID3-tags (song title/performer/…). The

CD may contain up to 999 MP3- files, spread over maximum 255 folders. When the MP3-files are sorted in

separate folders, the MCD1.1 will list all files as if no folders exist.

The MP3-files may have the following file extensions: .mp3 ~ .MP3 ~ .mP3 ~ .Mp3

Check the technical specifications to see which MP3-files are allowed.

 PLAYING CD-R and CD-RW:

Apart from normal audio CD’s the MCD1.1 can play both CD-R (CD recordable) and CD-RW (CD

rewriteable). Please note that you should always use the “disc at once” and “track at once” disc writing

options! If the disc is multi session, it will only play the first session:

o if the first session is CD-DA you can only play CD-DA tracks.

o if the first session is MP3 you can only play MP3 files.

 SLEEP MODE:

The CD player automatically shuts off the transport and laser after about 15 minutes (when in pause or

cue mode). This extends the life of your motor drive and laser. During sleep mode the display shows the

word “SLEEP”. To wake up the player, just press the cue or play button, the display turns to normal and is

ready to receive instructions.

 STORING A CUE POINT:

Put the player in pause and use the jog/shuttle wheel to search the exact location for the cue point. Once

this location is found, press the PLAY/PAUSE button to set the new cue point. (the cue led flashes 2 times

to indicate that the new cue point is set and the track starts playing from this new cue point)

Once the cue point is programmed, just press the CUE button to recall it.

 PITCH BENDING:

This function is used to put the beats of two tracks in perfect sync. This can be done in two ways:

 PITCH BEND buttons: The speed increases or decreases respectively as long as the PITCH BEND+ or

PITCH BEND- button is pressed.

 JOG WHEEL: During play mode the JOG WHEEL will temporarily bend the pitch of the music by turning

the JOG WHEEL clockwise to speed up or counterclockwise to slowdown. The rotation speed the JOG

WHEEL determines the percent of pitch bend.

ENGLISH USER MANUAL

JB SYSTEMS

6/36 MCD1.1

SPECIFICATIONS

Power Supply: AC 230 V, 50Hz

Power Consumption: 14W

Output level: 2.0Vrms +/1dB @ 1kHz

Frequency response: 20-20.000Hz (+/-0.4dB)

THD + noise: 0.006% @ 1kHz, 0dB

S/N Ratio (IHF-A): >102dB @ 1kHz.

Short access time (next track): <2sec

Long access time (track 1  20): <4sec

Electronic tracking: Full automatic digital tracking.

DISC FORMAT:

Possible file extensions: .mp3 ~ .MP3 ~ .mP3 ~ .Mp3

ISO9660: Level1 (max. 8”/8.3” character style)

Level2 (max. 31/30 character style)

Joliet: max. 64/64 character style

CD-ROM sector format: mode-1 only

Max. Folders: 255

Max. Files: 999

Max. Files/Folder: 255

MP3 FORMATS:

MPEG1 Layer3 (ISO/IEC11172-3): mono / stereo sampled at: 32 - 44,1 - 48kHz

Bitrates: 32 – 320 Kbps

Bitrate modes: CBR (Constant Bitrate) or VBR (Variable Bitrate)

MPEG2 Layer3 (ISO/IEC13818-3): mono / stereo sampled at: 16 – 22,05 - 24kHz

Bitrates: 8 – 160 Kbps

Bitrate modes: CBR (Constant Bitrate) or VBR (Variable Bitrate)

MPEG2,5 Layer3: mono / stereo sampled at: 8 – 11,025 - 12kHz

Bitrates: 8 – 160 Kbps

Bitrate modes: CBR (Constant Bitrate) or VBR (Variable Bitrate)

Dimensions: 482(W) x 88.8(H) x 268(D) mm

Weight: 4.5Kgs

Every information is subject to change without prior notice

You can download the latest version of this user manual on our website: www.beglec.com

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JBSystems MCD 1.1 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info