509236
24
Zoom out
Zoom in
Vorherige Seite
1/32
Nächste Seite
BT1611i
24
Pairing the Bluetooth system
with your Mobile Phone and
Head Unit
1. Press and hold the D (display) button (9)
to access the MENU. is
the first option on the menu.
2. Press the AUDIO CONTROL button (4) to
initiate the pairing process. Keep the
mobile phone within 2 meters of the unit
during pairing.
3. Refer to the instructions that came with
your mobile phone to activate the
Bluetooth function and search for devices.
4. Select “BT60” from the pairing list on the
mobile phone.
5. Enter “1234” as the password.
If pairing is successful, the display
will show .
If pairing fails, is
flashed on the display for 3 seconds,
and then the unit will revert to the
previous operation automatically. If
pairing fails, repeat the above steps.
NOTE: During Pairing, only the Power,
Volume +/-, B (Clear) and Mute keys are
functional. Other keys are disabled during
pairing mode.
Reconnecting
Automatic Re-connection
The unit has a built-in Auto Re-connection
function. When a paired phone is in range, the
head unit will automatically reconnect with the
mobile phone when the ignition key is turned on
(only if the mobile phone was previously paired
with the head unit). The unit will also
automatically reconnect when attempting to dial
a call through the head unit.
Manual Re-connection
Under the following conditions, you may need
to reconnect manually:
If the mobile phone is out of range (more
than 2 meters from the head unit).
If the connection is lost and while talking
on the phone (or there is an incoming call)
more than 2 meters from the head unit.
When doing an audio transfer from the
phone back to the head unit.
To manually reconnect with the paired phone,
perform the following steps:
1. Press and hold the D (display) button (9)
to access the MENU.
2. Press the D button again to select the
option.
The LCD displays
during the re-connection period.
If the re-connection is successful, the
LCD Display displays
and returns to the
previous mode.
If the re-connection fails, the LCD
displays and
automatically returns to the previous
mode.
Disconnecting the Phone from
the Head Unit
To manually disconnect with the paired phone,
perform the following steps:
1. Press and hold the D (display) button (9)
to access the MENU.
2. Press the D button again to select the
option.
3. Turn the AUDIO CONTROL (3) to select
.
The LCD displays
during the
disconnection period.
If the disconnection is successful, the
LCD Display displays
and returns to the
previous mode.
Managing Incoming Calls
When there is an incoming call, the LCD will
display the Caller ID. If the incoming call has no
caller ID, the LCD will display “PHONE IN”.
24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Jensen BT1611i wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info