Bedienungsanleitung Jensen HD5212 (Seite 19 von 32) (Englisch)

509254

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

HD5212

CD Player Operation

CDP mode can only be accessed when a disc is inserted. If a disc is

already in place, press the SRC button (2) to access CDP mode and begin

playback automatically.

Insert CD

Press the open button (9)

and allow the front panel to

fold down to display the

disc slot. With the label

surface facing up, fully

insert a compact disc into

the slot until the

mechanism engages and

pulls the disc in. After

inserting a disc, lift the front

panel up to return it to the

closed position and begin

playing the disc.

Eject CD

To eject a disc, first press

the open button (9) and

allow the front panel to fold down to display the disc slot (24).

Press the eject button (25) located to the right of the disc slot to eject the

disc. If the disc is not removed from the unit within 15 seconds, the disc will

be reloaded to prevent accidental damage.

NOTE: The unit is designed for play of standard 5” (12 cm.) compact

discs only. Do not attempt to use 3” (8 cm.) CD singles in this unit,

either with or without an adaptor, as damage to the player and/or the

disc may occur. Such damage will not be covered by the warranty on

this product.

Pause

Press the 1/>/|| button (13) to suspend disc play. Press the play/pause

button again to resume disc play.

Track Select

Press the TUNE/CH >> (10) or TUNE/CH << (11) button for less than one

second to advance to the next track on the CD. The selected track number

will appear on the display. Press and hold the TUNE/CH >> (10) or TUNE/

CH << (11) button for more than one second to fast forward or fast reverse

through the disc. CD play starts when the button is released.

Intro Scan (SCN)

During disc play, press 2/SCN (14) to play the first 10 seconds of each track

on the disc. When the desired track is reached, press 2/SCN again to end

the scan and play the selected track.

Repeat (RPT)

Press 3/RPT (15) during disc play to continuously repeat the track. Press 3/

RPT again to stop repeating.

Random (SHF)

Press 4/SHF (16) during disc play to play all tracks on a CD in random,

shuffled order. Press 4/SHF again to stop random play.

Display ID3 Tag Information

Press the DISP button (7) to display any text encoded on the CD (song title,

artist, etc.).

CD Player Error Codes

If a problem should develop while operating the CD player, an error code

(Error 1, Error 2, etc.) may appear on the display panel. This can indicate a

number of problems with the unit, including a mechanical error or an error in

the microprocessor control of the player. If an error code should appear, try

PRESS

RPT SHFSCN

SEL

CAT/DIR

AUX IN

MONO DISP

BAND

SRC

TUNE/CH

MUTE

A~Z

0~9

ENTER

IPOD

FILE/FOLDER

HD5212

SAT

READY

PRESS

RPT SHFSCN

3 4

SEL

CAT/DIR

AUX IN

MONO DISP

BAND

SRC

TUNE/CH

MUTE

A~Z

0~9

ENTER

IPOD

FILE/FOLDER

HD5212

SAT

READY

19 21

13 14 16

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Jensen HD5212 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info