Bedienungsanleitung Jensen HD5313 (Seite 7 von 62) (Englisch, Französisch, Spanisch)

509255

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

HD5313

Operation

Power

Press the (power) button (1) or any other button on the front of the radio

(except release) to turn the unit on. Press the power button to turn the unit

off.

Liquid Crystal Display (LCD)

The liquid crystal display (LCD) panel (8) displays the frequency, time and

activated functions of the unit, including a disc indicator, which appears lit

when a disc is inserted.

NOTE: LCD panels may take longer to respond when subjected to cold

temperatures for an extended period of time. In addition, the visibility

of the numbers on the LCD may decrease slightly. The LCD display

will return to normal when the temperature increases to a normal

range.

Mode

Press SRC (2) to select a different mode of operation, as indicated on the

display panel. Available modes include HD RADIO/TUNER (FM1, FM2,

FM3, AM1, AM2), CD, USB, SD CARD, iPod (if connected) and AUX

(auxiliary).

NOTE: CD, USB, SD CARD and iPod modes are only available if the

associated device or media is inserted.

Audio Mute

Press the MUTE button (6) to silence the audio volume. “MUTE” flashes in

the display. Press any button to cancel MUTE.

Volume / Audio Control

To increase the volume, rotate the rotary encoder (4) clockwise. To

decrease the volume, rotate the rotary encoder counter-clockwise. When

volume is adjusted, the volume level will be shown on the display panel as a

number ranging from “VOL 00” (lowest) to “VOL 100” (highest).

Press the rotary encoder repeatedly to step through the following audio:

VOLUME, BASS, TREBLE, BALANCE, FADER and SUB W. The unit

automatically exits audio control mode after five seconds of inactivity.

BASS

To adjust the bass level from “-10” to “10”, press the rotary encoder until

“BAS” appears on the display. Rotate the control clockwise to increase or

counter-clockwise to decrease the bass. “00” represents a flat response.

TREBLE

To adjust the treble level from “-10” to “10”, press the rotary encoder until

“TRB” appears on the display. Rotate the control clockwise to increase or

counter-clockwise to decrease the treble. “00” represents a flat response.

BALANCE

To adjust the balance from “10L” (full left) to “10R” (full right), press the

rotary encoder until “BAL” appears on the display. Rotate the control to

adjust the balance between the left and right speakers. “L=R” represents a

center balance.

FADER

To adjust the fader from “10F” (full front) to “10R” (full rear), press the rotary

encoder until “FAD” appears on the display. Rotate the control to adjust the

fader between the front and rear speakers. “F=R” represents an equal

balance between the front and rear speakers.

SUBW

To turn the subwoofer on/off, press the rotary encoder until “SUBW”

appears on the display. Rotate the control to choose “ON” or “OFF”. “OFF”

is the default setting.

15 17

HD5313

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Jensen HD5313 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info