Bedienungsanleitung Jensen HD5313 (Seite 10 von 62) (Englisch, Französisch, Spanisch)

509255

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

HD5313

Preset Stations

Six numbered preset buttons store and recall stations for each band.

Store a Station

Select a band (if needed), then select a station. Hold a preset button (13-18)

for three seconds. The preset number will appear in the display.

NOTE: HD Radio multicast channels can be stored as preset stations.

Recall a Station

Select a band (if needed). Press a preset button (13-18) to select the

corresponding stored station.

Scan

Press the SCAN button (21) to scan the current AM or FM band. The unit

will pause for 5 seconds at each station. Press the SCAN button again to

stop scanning when the desired station is reached.

Broadcast Information

During HD Radio broadcasting, available broadcast information will

automatically appear on the LCD. Press the DISP button (7) multiple times

to view broadcast information in the following order:

• Band/Frequency

• Station Call Letters

•Song

•Artist

• RDS Category

The information will scroll across the screen if longer than 8 characters.

NOTE: The amount of information displayed when receiving an HD

Radio signal is dependent upon what is being broadcast. Some

stations broadcast their call letters (name), the artist's name, song

title, and category of music.

iTunes

Tagging

The HD5313 offers iTunes

Tagging, which allows the user to "Tag" songs

playing on HD Radio™ stations for purchase later through iTunes. When

the TAG button (23) is pressed, the unit stores the title and artist song

information that can then be transferred to your iPod when connected to the

USB connector. A list titled "Tagged" will appear in iTunes, allowing you the

option to purchase your tagged songs.

iPod Compatibility

Models supported, but not limited to, include the following

• iPod Nano 4G

• iPod Classic

• iPod Touch

• iPod Nano 3G

Tagging Music

To begin tagging music, tune to an HD Radio station. The “TAG” icon must

be illuminated, indicating a digital station is being received. Press the TAG

button. The song information is saved to the head unit memory until an iPod

is connected. When the tag is successful, the screen displays “TAG SENT”.

You can tag up to 50 songs before the tags must be transferred to an iPod

or deleted. When the Tag memory reaches capacity (50 tags) the screen

displays “STORED FULL”.

HD5313

PRESS AND HOLD

PRESET NUMBER APPEARS

Table 1: TAG Messages

Tag Message Reason

TAG NOT AVAILABLE Make sure HD Radio signal is being received.

ALREADY STORED Song has already been tagged. You cannot save

the same song twice unless you tag it on a differ-

ent station.

IPOD ERR iPod error. Check iPod.

TRANSFER FAILED Error sending tags to the iPod. Make sure iPod is

powered on and reconnect until “TAG SENT” is

displayed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Jensen HD5313 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info