Bedienungsanleitung Jensen JHD910 (Seite 8 von 12) (Englisch)

509197

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

JHD910

5. Auxiliary Input Function

To connect a portable audio device (MP3 player, iPOD, etc.) to the JHD910, connect the headphone or

line level output of the device to the 1/8" auxiliary input jack of the JHD910 (5b) using the audio patch

cord (included). Pres AUX (5a) to select auxiliary input mode.

6. Timer

Press TIMER (6) momentarily to directly access timer mode. Briefly press TIMER to start the timer

function, and the “TIMER” icon will flash in the display. Press TIMER again to stop the timer, and the

“TIMER” icon will remain in the display (without flashing). Press the button again briefly to resume the

timer, or press and hold it for three seconds to reset it to zero and to remove the “Timer” icon from the

display.

7. Volume

Briefly press VOL+ (7a) or VOL- (7b) to adjust the volume up or down one step. Press and hold VOL+

or VOL- for more than one second to continuously adjust the volume level until the button is released.

The current volume level (0 to 40) will appear in the display when the volume is adjusted, returning to

the default display three seconds after the adjustment is complete.

8. Setting the Clock

To set the clock to display the current time, press DISP for more than three seconds to enter clock

setting mode, and the time will flash in the display. Press TUN- (8a) to adjust the hours or TUN+ (8b) to

adjust the minutes. When no adjustment is made for ten seconds, the time will be set and normal

operation will resume.

9. Audio and Menu Adjustment

Audio Adjustment

Press AUDIO/MENU (9) momentarily to step through the following audio adjustment options: Bass,

Treble and Balance (left to right). When the desired option appears in the display, press VOL+ (7a) or

VOL- (7b) to adjust that audio feature. When no adjustments have been made for three seconds, the

unit will resume normal operation.

Menu Adjustment

Press AUDIO/MENU for more than three seconds to enter menu adjustment mode and adjust any of

the menu options: When the desired option appears in the display, press VOL+ or VOL- to adjust that

menu option. When no adjustments have been made for three seconds, the unit will resume normal

operation. The following menu options may be adjusted using this feature:

• Beep Confirm (On or Off) - Determines if a beep will be heard each time a button is pressed.

• Operation Region (USA or Euro) - Selects the appropriate operating region.

• Clock Display (12 or 24) - Selects a 12-hour or 24-hour clock display.

• Display Brightness (Low, Mid or High) - Determines brightness level of the display.

• Backlight Color (Amber or Green) - Determines the backlight color of the unit.

• Turn On Volume (0-40) - Selects desired volume level for the unit to assume when turned on.

• WB Alert (On or Off) - Determines if the weather band alert feature is activated.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Jensen JHD910 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info