Bedienungsanleitung Jensen MP6211 (Seite 13 von 52) (Englisch)

509262

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

MP6211

TUNER OPERATION

The MP6211 comes equipped with a World Tuner, allowing you to receive channels in USA,

EUROPE, LATIN, & OIRT (Russia). See “Frequency Spacing” on page 7 to learn how to

change the World Tuner options.

Select a Band

Press BAND (19) to change between three FM bands and two AM bands. Each band stores up

to six preset stations.

Tuning

Manual Tuning

Press the Up Tuning (10) or Down Tuning (11) button for more than three seconds to enter

manual tuning mode, then press the Up Tuning or Down Tuning buttons to move the radio

frequency number up or down one step.

Auto Seek Tuning

Press the Up Tuning (10) or Down Tuning (11) button for less than three seconds to move to

next station automatically.

Scan

Press SCAN (20) to scan through strong stations in the current band. The radio pauses for five

seconds at each strong station. Press SCAN again to listen to the current station.

Preset Stations

Up to six stations on each band can be stored as presets and can then be instantly recalled by

pressing the associated preset button (12-17). To store a station, turn the radio on and select

the desired band and station. Press and hold the desired preset button (numbered one through

six on the face of the radio) for more than two seconds. When stored, the preset number will

appear in the display. The station is now stored and can be re-called at any time by pressing

the corresponding preset button. Repeat for the remaining five presets on the current band and

for all presets on the other three bands.

Automatically Store / Preset Scan (AS/PS)

Automatically Store

Select six strong stations and store them in the current band using the Automatic Store feature.

To enable this feature, press and hold AS/PS (21) for more than two seconds. The radio will

automatically scan the band in use and enter strong stations into the preset memory positions

for that band. After entering the stations into memory, the unit will automatically stop at each

station for five seconds so each can be heard. When using the Automatically Store feature, the

new stations replace any stations already stored in preset memory for the selected band.

Preset Scan

Press AS/PS (21) to scan the six preset stations in the current band. The unit will stop at each

station for five seconds before continuing to the next preset station, and the preset number will

flash on the display during the preset scan. Press AS/PS again to stop scanning and listen to

the current station.

Stereo

The unit will automatically pick up a stereo signal, when available. When in stereo mode, the

“ST” icon (18) appears in the display. When no stereo signal is available, the unit will

automatically revert to mono operation, and no icon will be displayed.

PRESS AND HOLD

PRESET NUMBER APPEAR

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Jensen MP6211 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info