Bedienungsanleitung Jensen SD1413 (Seite 8 von 23) (Englisch)

509269

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

SD1413

Preset Stations

Up to six stations on each band can be stored

as presets and can then be instantly recalled by

pressing the associated preset button on the

front panel (19-24) or remote control. To store a

station, turn the radio on and select the desired

band and station. Press and hold the desired

preset button (numbered one through six on the

face of the radio or remote control) for more

than two seconds. When stored, the preset

number will appear in the display. The station is

now stored and can be recalled at any time by

pressing the corresponding preset button.

Repeat for the remaining five presets on the

current band and for all presets on the other

three bands.

Preset Scan/Automatically Store

(PS/AS)

Automatically Store

Select six strong stations and store them for all

bands using the Automatic Store feature. To

enable this feature, press and hold the PS/AS

button (17) for more than two seconds. The

radio will automatically scan each band and

enter strong stations into the preset memory

positions. After entering the stations into

memory, the unit will automatically stop at each

station for five seconds so each can be heard.

When using the Automatically Store feature, the

new stations replace any stations already

stored in preset memory.

Preset Scan

Press the PS/AS button (17) to scan the six

preset stations in the AM band or all FM bands.

The unit will stop at each station for five

seconds before continuing to the next preset

station, and the preset number will flash on the

display during the preset scan. Press PS/AS

again to stop scanning and listen to the current

station.

SERIES

AF BUTTON(ALTERNATIVE FREQUENCIES)

When pressed short, AF switching button (18)

mode is selected.

When AF switching mode is selected, the radio

check the signal strength of the AF all the time.

When pressed long, it is activated as regional

mode ON/OFF.

- Regional mode ON:

AF Switching or PI SEEK is implemented to the

station which have all PI codes are same as

current station. REG segment is turned on, in

LCD display.

- Regional mode OFF:

The Regional code in the format of PI code is

ignored when AF switching or PI SEEK is

implemented.

Some broadcasting stations may change their

program from normal broadcasting to regional

broadcasting for a certain period. When regional

mode is off, the region identification in the PI

code is ignored; the radio may switch to a local

variant of the current program. When region

mode is on, the radio will only switch to a

program carrying the exact same PI code.

TA BUTTON(TRAFFIC ANNOUNCEMENT)

When pressed short, it is activated as TA

mode on or off

When TA mode is on and traffic announcement

is transmittude

- When the unit is in CD mode, it will switch to

radio mode temporarily.

- If the volume lever was under the threshold

point, it will be raised to the threshold point.

- When TP station is received, TP segment is

turned on in LCD display.

When pressed long, EON TA LOCAL /EON TA

DISTANCE mode is selected.

- EON TA LOCAL mode

When the field strength level of EON linked is

less than the threshold level. The radio does not

switch that station and user can hardly listen to

any disturbances. “EON TA LO “ is displayed a

few second.

- EON TA DISTANCE mode

EON TA switching is try to implemented by the

information of current station “EON TA DX” is

displayed a few second this mode is selected

button

(25)

Note: When AF switch is on, at this moment

use tuning up/down to search station will only

stop at station which has RDS broadcasting.

Note: When TA switch is on, at this moment

use tuning up/down to search station will only

stop at station which has TA broadcasting.

PTY Button

Each time when this button is pressed, the PTY

PTY Music Group -> PTY Speech Group ->PTY Off

button(15)mode will toggle in the following order:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Jensen SD1413 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info