Bedienungsanleitung JGC RRMP-8310 (Seite 24 von 41) (Deutsch, Englisch)

623882

Zoom out

Zoom in

Vorherige Seite

1/41

Nächste Seite

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

Installation location

• Use this device in dry indoor areas only and never outdoors.

• Warning: Do not use this device near water or heavy moisture; e.g. in a damp basement or beside a

swimming pool or bathtub.

• Use this device in well-ventilated areas. Do not block off the air openings. Put the device in a place only in

accordance with the manufacturer’s instructions. Keep a minimum free distance of 10 cm around the device

in order to allow for sufﬁcient cooling. Do not cover the device with newspapers or other textiles such as

drapes, blankets and clothing.

• Keep this device away from all heat sources like for example, ovens, hot plates and other heat-producing

devices/objects.

• In order to reduce the risk of ﬁre and electric shock, do not expose the device to ﬁre (ﬁreplace, grill, candles,

cigarettes and so on) or water (water drops, water splashes, vases, tubs, ponds and so on).

• Only use this device in temperate latitudes; avoid using it in tropical and in especially damp climates.

• Do not use this device in a very dry environment. This can result in electrostatic discharges.

• Protect this device from extreme heat (over 35°C) and cold (under 5°C) as well as from direct sunlight and

dust.

• Do not place this device near objects which create a strong magnetic ﬁeld (e.g. motors, loudspeakers,

transformers).

Power supply

• The mains voltage must match the information on the rating label of the device.

• The power plug is used as the disconnect device. Please be sure that the power plug is in operable

condition.

• Only removing the power plug can separate the device completely from the mains supply.

• The power switch does not separate the device from the mains. In order to separate the device from the

power supply, unplug the power cord.

• Avoid damages to the power cord that may be caused by kinks or contact with sharp corners.

• Make sure, the device, including power cord and power plug are not exposed to hot surfaces.

• Only unplug from the power outlet by the plug itself. Do not pull on the cord.

• Disconnect the power plug when the device is not in use, in case of malfunctions and prior to each cleaning.

• Unplug the power cord during lightning storms and prolonged absence in order to protect the electronics

against overvoltage and damage.

• If the power cord or the casing of the device is damaged or if the device is dropped, the device may not be

used before it is examined by a professional electrician.

• A damaged power cord may only be replaced by the manufacturer or a workshop commissioned by the

manufacturer or by a similarly qualiﬁed person in order to avoid hazards.

• Protect the power cord and the housing from damage.

JGC-RRMP-8310-IM-DE-EN-V1.indb 24 14/05/2010 3:50 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JGC RRMP-8310 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info