Bedienungsanleitung JGC RRMP-8310 (Seite 33 von 41) (Deutsch, Englisch)

623882

Zoom out

Zoom in

Vorherige Seite

1/41

Nächste Seite

ENGLISH

CD PLAYER

Programming track playback

• You can program the CD player to play a sequence of up to 32 tracks. The playback list can only be

programmed in stop mode. Press the button (8), before beginning programming.

• Press the PLAY MODE button (4) once to switch to programming mode. The number of the storage space

P01 and PROG are shown blinking on the display.

• Select a CD track with the buttons / (6) and / (7). Store your selection with the PLAY MODE

button. The second storage space P02 is opened and can be occupied again as before.

• Proceed as described above to program further tracks.

• You can occupy up to 32 storage spaces. If all storage spaces are occupied, the display shows FUL.

• Press the button (9) to play the program. PROG is then shown on the display.

• Once all programmed tracks have been played, the device stops automatically.

• Press the button (8) to end the program playback. The playback list remains in the storage. In the display,

the number of tracks and PROG is shown. You can play the same playback list again by pressing the

button (9).

• By pressing the button (8) twice the playback list is deleted. The program is also deleted if you:

- open the CD tray (2),

- slide the FUNCTION switch (23) to another position,

- switch off the device with the power switch (29).

• Note: The repeat function can be combined with the playing of a program. For this, read the Repeat function

section.

Playing MP3/WMA-CD

• This device can play back CDs (CD-R and CD-RW) with MP3-/WMA ﬁles as well as all recorded audio CDs

(CD-DA). Other ﬁle extensions are not supported.

• WMA ﬁles which have DRM copy-protection cannot be played by this device. NO is shown on the display if

you attempt to play DRM WMA ﬁles.

• The playback functions for MP3/WMA-CD are largely identical to the functions for audio CDs. Therefore,

in the following section, only the differences when playing a MP3/WMA-CD and additional functions are

described.

• Switch the device into CD playback mode and insert an MP3/WMA CD.

• Since the MP3/WMA-CDs can contain signiﬁcantly more tracks, it can take longer for the CD player to read

the entire contents directory.

• On the display (17) the total number of tracks and the control display MP3 or WMA will be shown.

• If the MP3/WMA-CD is in stop mode, keep the FOLDER button (5) pressed for approx. 2 seconds to the

see total number of directories. On the display, the total number of directories (e.g. 012 for 12 directories),

ALBUM, as well as a folder symbol will brieﬂy be shown blinking.

• You can select a certain directory and start the playback of a track from this directory. CD in Stop Mode:

Hold the FOLDER button (5) pressed for approx. 2 seconds until the total number of directories blinks in the

display. Then brieﬂy press the FOLDER button several times in order to select a directory. Finally press the

button (9) to start the playback of the ﬁrst track in the selected directory.

JGC-RRMP-8310-IM-DE-EN-V1.indb 33 14/05/2010 3:50 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JGC RRMP-8310 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info