570926
4
Zoom out
Zoom in
Vorherige Seite
1/6
Nächste Seite
4
GB
www
.jobo.com
In the normal On Screen Display (OSD) the loop recording is symbolized by a pictogram. The chosen video
sequence length is also indicated underneath the pictogram.
5. Motion detection:
If this feature is activated, the camera will instantly start recording when turned on as soon as a movement is
detected within the viewing angle of the CARcam. After 10 seconds without motion within viewing angle the
camera recording is switched off again. As soon as a new movement is detected the recording automatically
restarts.
This allows for use of surveillance purposes as long as the camera battery is fully charged or as long as the camera
is connected to the car power supply.
When the motion detector is activated the pictogram of a runner is shown in the OSD.
6. Recording:
The sound recording can be activated or deactivated. If sound recording is activated the pictogram of a
microphone is shown in the OSD.
7. Regular OFF-screen
This function allows you to activate auto-power off of the display after 2, 5, or 10 minutes of making no camera
settings. If this setting is activate the camera will not power off. Only the display will be blank while the camera
will still be operating. We recommend to keep this function deactivated.
8. G-Sensor (Gravity Sensor)
This is a very important feature, developed for dash cameras.
The built-in Gravity sensor senses any impact and will protect the corresponding video file against being over-
written. This will avoid important recordings from being lost (“Black-Box-Function”). We recommend to activate
this function, especially when making cyclic recordings (loop recordings). If the G-Sensor is activated this is
indicated by a pictogram of a car with illustrated vibration.
Main Settings (symbol of a wrench)
1. Date / Time.
Before initial operation we recommend you to set correct time and date. The time and date set here can be
recorded in the video and shown in play-back (see point 11 below).
2. Auto Power off:
With this setting you can activate complete auto-power off of the camera after 2, 5, or 10 minutes of making no
camera settings. If this setting is activate the camera will completely power off. We do not recommend you to
activate this option.
3. Beep Sound:
The beep sound during menu operation can be activated or deactivated
4. Language:
You can choose any of the following languages: English, German, French, Spanish, Italian, Portuguese, Chinese,
Japanese, and Russian.
5. TV-Mode:
You can choose between the European PAL-Standard or the American NTSC setting.
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Jobo CARcam 1080P wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Jobo CARcam 1080P

Jobo CARcam 1080P Bedienungsanleitung - Deutsch - 5 seiten

Jobo CARcam 1080P Bedienungsanleitung - Holländisch - 6 seiten

Jobo CARcam 1080P Bedienungsanleitung - Französisch - 5 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info