Bedienungsanleitung Jocca 6643 (Seite 16 von 24) (Englisch, Französisch, Portugiesisch, Spanisch)

553861

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

!)&!&'"&!)$&$

-This sewing machine lifts up the thread manually, and this is very easily done by

taking the following steps:

1.Hold the upper thread with your left hand

2.Using your right hand turn the manual wheel (nº 11) in the direction indicated by

the arrows (clockwise) for the needle to make a complete cycle (go down/go up

completely) and when the needle is in the lower position it will take up the lower

thread and lift it up to the highest position.

3.Once the needle is in its highest position take hold of the lower thread in your

hand and pull both threads (upper and lower) towards the back part of the machi-

ne.

4.The sewing machine is now ready to start sewing again.

!)&!'%&&&$& %!

-If you see that when you are sewing the seams are not tight

and the thread knots up frequently, this means that the thread

tension must be checked.

-For proper sewing the tension of both the upper and the lower

thread must be the same, and there is a dial provided for this

purpose (nº 3) to adjust the upper tension more or less as

required and also to adjust the tension of the lower thread. The

lower spool has a screw to adjust the thread tension. Please see the illustration.

-The thread tension depends on a series of circumstances, on the type of needle,

on the type of cloth, on the type of stitch and consequently in order to check the

correct thread tension trial stitching must be made and an adjustment made in

accordance with the result.

-To know whether the tension is correct, the seam must be like in the following illus-

tration a.

D-9<81?;25:/;>>1/@@4>1-0@1:?5;:

•Upper thread tension too high (or lower thread too low), image b.

•Upper thread tension too low ( or lower thread too high), image c

!)&!! "&+%"!!

-When the lower spool no longer has any thread left, you have an automatic option

to load it by taking the following steps:

1.Pick up the empty spool and put it on the spool spindle (nº 20)

2.Take hold of the end of the upper bobbin thread in the bobbin peg (nº 14) and

thread through the pressure selector (nº 15) until you reach the empty spool which

is located on the spool spindle (nº 20), take hold of the empty spool and wind the

thread around the same a couple of times.

3.Finally press the winding button (nº 13) to start to fill the bobbin with thread.

When you have reached the amount you require, press the button again (nº 13) to

stop and cut the thread

 

-If the needle breaks you will need to change this to be able to carry on sewing.

For this please take the following steps:

1.Disconnect the machine from the mains electricity supply.

2.Lower the presser foot by means of the lever (nº 8)

3.Lift the needle up manually to its highest point. To do this turn the manual wheel

(nº 11) in the direction indicated by the arrows (clockwise).

4.Turn the needle adjustment screw (nº 5), towards the left and the needle will

come out.

5.To put a new needle in place, please make sure that the flat part of the needle is

facing the back part of the machine.

6.Take hold of the needle between your thumb and forefinger and push the needle

up to the very end.

7.Finally tighten down the adjustment screw (nº5) towards the right to ensure that

the needle is fully tight and in place.

%&& !%&! 

The stitching you require is selected by turning the stitching dial (nº 10) to the right

or to the left. Please ensure that the needle is in its highest position before attemp-

ting to turn the stitch selector dial.

)$  : If the needle is not in its highest position it can easily break.

30-E E-31

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Jocca 6643 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info