50
-Press the “ WIND ” button to select wind speed.
6. Heating operation (this function is not available for a cold-single unit)
-Press the “Mode” button till the “Heat” icon appears.
-Press the “ DOWN ”or“ UP ” button to select a desired room temperature. (16℃-31℃)
-Press the “ WIND ” button to select wind speed.
7. Timer operation
Timer ON setting:
-When the air-conditioner is OFF, press the “Timer” button and select a desired-ON time through the
temperature and time setting buttons.
-“Preset ON Time” is displayed on the operation panel.
-ON time can be regulated at any time in 0-24 hours.
Timer OFF setting
-When the air-conditioner ON, press “Timer” button and select a desired OFF time through the temperature
and time setting buttons.
-“Preset OFF Time” is displayed on the operation panel.
-OFF time can be regulated at any time in 0-24 hours.
8. Swing (Air Flow)
After machine turns on, press this key, the louver will swing continuously up and down; when press this
button again the movement will stop and the louver remain in that position.
9. Sleep Control Function
-While in cooling mode, press the SLEEP key to set the temperature. It increases1 ℃ after an hour and at
most increases 2 ℃ after 2 hours.
-While in heating mode, press the SLEEP key to set the temperature. It decreases 1 ℃ after an hour and at
most decreases 2 ℃ after 2 hours.
-Press the SLEEP key again can cancel the setting.
10. Drainage
Internal tank water full alarm function. The inner water tank in the air-conditioner has one water level safety
switches, it controls water level. When water level reaches an anticipated height, the water full indicator
lamp lights up. (If water pump is damaged, when the water is full, please remove the rubber blockage at the
bottom of unit, and all water will drain outside.)
