Bedienungsanleitung Johnson Control T600MEP-3 (Seite 10 von 17) (Englisch)

37750

Zoom out

Zoom in

Vorherige Seite

1/17

Nächste Seite

T600MEP-3 Multi-stage Economizer Thermostat Installation Instructions10

Operation

Programming/Operating the T600MEP-3

Thermostat

Once the thermostat is configured via the Installer

Configuration Menu, its operating parameters can be

programmed via the Main User Menu. Access this

menu by pressing the MENU key during normal

thermostat operation. The Main User Menu contains

the basic operating features of the thermostat.

The Main User Menu also uses Auto Help, which is

displayed automatically in the menu when there is a

pause in programming activity. To exit Auto Help,

continue with the programming selection. When the

thermostat is in the Main User Menu and is left

unattended for 45 seconds, the menu reverts to the

Status Display Menu.

Follow the steps in Table 3 to program the thermostat.

Enabling Temporary Override Schedule

Note: The Override Schedule prompt only appears

when in the Unoccupied (Unoccup) or Unoccupied

Hold (Unoccup hold) Mode.

The override schedule prompt only appears when the

thermostat is in the unoccupied state. This menu

selection gives the user the option of overriding the

unoccupied setpoints with the occupied setpoints for

the amount of time specified under the TOccTime

parameter. See the Configuring the T600MEP-3

Thermostat section.

Note: If DI1 or DI2 is configured to operate as a

remote override contact, this menu is disabled.

To override the unoccupied state while in the Main User

Menu:

1. Press the NO key to all prompts until the Override

Schedule prompt appears. If the thermostat is in

the unoccupied state, this is the first prompt.

2. Press the YES key to enable the temporary

override. The thermostat returns to the Status

Display Menu.

When scrolling through the Status Display Menu,

Override now appears for the occupancy status

parameter.

Table 3: Programming the T600MEP-3 Thermostat

(Part 1 of 2)

Thermostat

Display

Description

Press the MENU key while in the

Status Display Menu to enter the

Main User Menu.

Overrides Unoccupied Setpoints

Only Appears if Thermostat is in

Unoccupied State

See the Enabling Override Schedule

section.

Cancels Override mode.

Sets the Temperature Setpoints

See the Entering Permanent

Temperature Setpoints section.

Selects the System Mode Default:

Automatic (auto)

See the Selecting the System Mode

section.

Selects the Fan Mode Default:

Automatic (auto)

See the Selecting the Fan Mode

section.

RoomTemp

75.0

Override

schd Y/N

Cancel

ovrd Y/N

Temperat

set? Y/N

Sys mode

set? Y/N

Fan mode

set? Y/N

Sets the Occupied and Unoccupied

Time Periods

See the Programming the Daily

Schedu1le – Two-Event

and

Programming the Daily Schedule –

Four-Event

sections.

Sets the Day and Time

See the

Setting the Day and Time

section.

Sets a Permanent Hold on the

Schedule or Resumes the Schedule

See the

Setting Schedule Hold

section.

Table 3: Programming the T600MEP-3 Thermostat

(Part 2 of 2)

Thermostat

Display

Description

Schedule

set? Y/N

Clock

set? Y/N

Schedule

hold? Y/N

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Johnson Control T600MEP-3 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info