Bedienungsanleitung Joie Nitro LX (Seite 7 von 44) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

768439

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Use Brake

To lock wheels, step the brake lever downwards. 19

To release wheels, just lift the brake lever upwards. 19 - 1

Tip Always apply brake when stroller is in stopped position.

Tip Clean brake system regularly to ensure fully functional. See care and maintenance section.

Tip To ensure brake is fully on, gently rock the stroller backwards and forwards before releasing the handle.

Use Hood

To open the canopy, pull canopy toward front. 20

To fold the canopy, pull canopy toward back.

Fold Stroller

! Please fold the hood before folding the stroller.

Lift the folding plate 21 , step the folding pedal downwards 22 - 1, push the stroller forward to fold 22 - 2. The

storage latch will automatically hook onto the storage mount, then the stroller is folded and locked completely. 23

Use Carry Strap

You can carry the stroller with ease by lifting the carry strap. 24

Accessories

Accessories may be sold separately or may not be available depending on region.

Use Rain Cover

To assemble the rain cover, place it over the stroller, and then attach the 4 pairs of hook and loop fasteners on the

rain cover. 26

! When using the rain cover, please always check its ventilation.

! When not in use, please check that the rain cover has been cleaned and dried before folding.

! Do not fold the stroller after assembling the rain cover.

! Do not place your child into the stroller assembled with rain cover during hot weather.

Use Armbar

see images 27 - 30

Care and Maintenance

! Removable seat pad may be washed in cold water and drip-dried. No bleach.

! To clean stroller frame, use only household soap and warm water. No bleach or detergent.

! From time to time, check your stroller for loose screws, worn parts,torn material or stitching. Replace or

repair the parts as needed.

! Excessive exposure to sun or heat could cause fading or warping of parts.

! If stroller becomes wet, open hood and allow to dry thoroughly before storing.

! If wheels squeak, use a light oil (e.g., Silicon Spray, antirust oil, or sewing machine oil). It is important to get

the oil into the axle and wheel assembly. 25

! If brake pedal stiff/hard to fully engage, flush any debris from brake system with clean water first before

lubricating.

! When using your stroller at the beach or areas of high dust/sand, completely clean your stroller after use to

remove sand and salt from brake mechanisms and wheel assemblies.

Stroller Operation

Adjust Recline

There are 5 angles for the backrest.

Squeeze the adjust button 10 - 1 , and then adjust the backrest to a desired angle. 10 - 2

To raise the backrest, push up.

! Make sure the recline is set properly for use.

Use Buckle

Release Buckle

Press the center button to release the buckle. 11

Lock Buckle

Match the waist belt buckle with the shoulder buckle 12 - 1, and click into the center buckle. 12 - 2

A “click” sound means the buckle is locked completely. 12 - 3

! To avoid serious injury from falling or sliding out, always secure your child with harness.

! Make sure your child is snugly secured. The space between the child and the shoulder harness is about the

thickness of one hand.

! Do not cross the shoulder belts. This will cause pressure on child’s neck.

Use Shoulder & Waist Harnesses

! In order to protect your child from falling out, after your child is placed into the seat, check whether the

shoulder and waist harnesses are at proper height and length.

13 - 1 Shoulder harness anchor A

13 - 2 Shoulder harness anchor B

13 - 3 Slide adjuster

For larger child, use shoulder harness anchor A and the highest shoulder slots. For smaller child, use shoulder

harness anchor B and the lowest shoulder slots.

To adjust the position of the shoulder harness anchor, turn the anchor to be level with the side facing forward.

Thread it through the shoulder harness slot from back to front. 14 Rethread it through the slot that is closest to

child's shoulder height. 15

Use slide adjuster to change the harness length. 16 - 1

Press the button 16 - 2, while pulling the waist harness to proper length. 16 - 3

Adjust Calf Support

The calf support has 2 positions.

Raise Calf Support

To raise the calf support, just push it upwards.

Lower Calf Support

Press the adjustment buttons on both sides of the calf support 17 - 1, and rotate the calf support downwards.

17 - 2

Use Front Swivel Lock

Push up the front swivel locks to maintain the moving direction. 18

Tip It is recommended to use swivel locks on uneven surfaces.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Joie Nitro LX Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info