Bedienungsanleitung Joovy Nook NB (Seite 6 von 43) (Englisch, Französisch, Spanisch)

780403

Zoom out

Zoom in

Vorherige Seite

1/43

Nächste Seite

Installing, Operating and Removing the Tray

• Before installing the tray, the right aligner must be installed onto the tray

• To attach this aligner to the tray, place the tray upside down on the oor or table. Also remove the

aligner from its packaging and place it open side up to the right of the tray. (2)

• Push the at locking button on the right toward the right. (3A) and insert the rounded end of the

aligner into the slot. (3B)

• Push the aligner all the way in until it stops and then release the locking button to lock it in place. (4)

• The left aligner is already attached to the tray.

• To install the tray, turn it so that the tray surface is on top.

• With each hand, reach under each side of the tray and press the spring-loaded release buttons

upward. (5)

• Align the two tray aligners with the posts on the high chair and slide the tray onto these posts. (6)

• Slide BOTH sides of the tray all the way toward the high chair seatback as far as they will go and

then let go of the release buttons to lock it in place.

• Make sure both sides of the tray are positioned at the same distance from the seatback.

• Gently pull upward on the tray to ensure it is installed properly.

• To adjust the tray position, squeeze the spring-loaded release buttons under BOTH sides of the

tray and either push or pull the tray into the desired position. (7) Always ensure that BOTH sides of

the tray are positioned at the same distance from the seatback.

• To swing the tray open, squeeze the locking button under the right side of the tray ONLY and pull

the tray toward the front of the high chair. (8)

NOTE: The tray swing feature will not work properly if both sides of the tray are not at the same

distance from the seatback.

• To close the tray, gently swing the tray back toward the aligner. The tray will automatically lock

into position.

• Use caution when closing the tray with the child seated in the high chair.

• To completely remove the tray, squeeze the spring-loaded release buttons on BOTH sides of the

tray and pull the tray toward the front of the high chair.

Unpacking the Product

• Remove everything from the box – high chair, tray with tray insert, right aligner for tray and

documents (not shown).

• Discard all packaging materials properly, including plastic coverings.

• DO NOT allow children to play with any packaging materials.

Unfolding the High Chair

• Keep children away from high chair while unfolding.

• Stand to the side of the folded high chair, hold the handle behind the seat and pull upward on the

seatback until it locks into its upright position. (1)

• Be careful not to pinch your ngers as the seat is raised.

• Place one foot on the rear frame bar and try to move the seatback back and forth to ensure it is

secure in its upright position.

Assembly and Usage

IWARNING : Adult assembly is required for this

product. No tools required.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Joovy Nook NB Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info