8
ENGLISH
Table of contents
1.0 Relationship to the authorities ....................... 8
2.0 Technical data ................................................. 8
3.0 General safety precautions.............................9
4.0 Installation ......................................................9
5.0 Use ..................................................................10
6.0 Maintenance .................................................. 12
7.0 Service ............................................................. 13
8.0 Optional Equipment and Accessories ........... 13
9.0 Operational problems - troubleshooting ..... 13
Figures .................................................................48
1.0 Relationship to the
authorities
Installation of a fireplace must be according to local codes and
regulations in each country.
All local regulations, including those that refer to national and
European standards, shall be complied with when installing the
product.
Instructions for mounting, installation and use are enclosed with
the product. Prior to using the product the installation must be
inspected by a qualified person.
A product data label in heat resistant material can be found on the
heat shield at the back of the product. This contains information
about identification and documentation for the product.
2.0 Technical data
Material: Cast iron
Finish: Black paint
Fuel: Wood/coal
Log length, max: 40 cm
Flue outlet: Top, rear
Flue pipe dimension: Ø150 mm, 177 cm
2
cross section
Approx. weight: 124 kg
Optional extras: Decorative enamelled floor plate in
blue black - Rear heat shield, short
legs* (see 8.0)
Dimensions, distances: See fig. 1
Technical data according to EN 13240
Wood Briquetted Coal
Nominal heat output: 6,5 kW 4,0 kW
Flue gas mass flow: 4,8 g/s 6,7 g/s
Recommended chimney
draught: 12 Pa 12 Pa
Efficiency: 79%@7,4kW 70%@3,9 kW
CO emission (13% O
2
): 0,30% 0,63%
Flue gas temperature: 330
o
C 228
o
C
Operational type: Intermitterende Intermitterende
