Bedienungsanleitung Jotul S72 (Seite 98 von 112) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Schwedisch, Norwegisch, Finnisch)

657950

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

3.1 Fire Prevention Measures

There is a certain element of danger every time you use

your ﬁ replace. The following instructions must therefore be

followed:

• The minimum safety distances when installing and using

the ﬁ replace are given in ﬁ g. 2 in the installation manuals

for the products.

• Ensure that furniture and other combustible materials are

not too close to the ﬁ replace. Combustible materials must

not be placed within 1,000 mm of the ﬁ replace opening.

• Allow the ﬁ re to burn out. Never extinguish the ﬂ ames with

water.

• The ﬁ replace becomes hot when lit and may cause burns

if touched.

• Only remove ash when the ﬁ replace is cold. Ash can

contain hot embers and should therefore be placed in a

non-ﬂ ammable container.

• Ash should be placed outdoors or be emptied in a place

where it will not present a potential ﬁ re hazard

In the event of ﬁ re in the chimney.

• Close all doors and valves.

• Keep the ﬁ rebox door closed.

• Check the loft and the basement for smoke.

• Call the ﬁ re brigade.

• Before a ﬁ replace can be used after a ﬁ re or an attempted

ﬁ re, the ﬁ replace and the chimney must be inspected and

found to be in order by competent personnel.

3.2 Floor

Foundation

You must make sure that the foundation is suitable for the

ﬁ replace. See “2.0 Technical Data” for speciﬁ ed weight.

We recommend the removal of any ﬂ ooring that is not attached

to the foundation (“ﬂ oating ﬂ oors”) beneath the installation.

Requirements for protection of wooden

ﬂ ooring beneath the ﬁ replace

If you intend to place the product directly on a wooden ﬂ oor,

you must use a bottom plate (item no. 10047361, optional

extra.

Requirements for protection of combustible

ﬂ oors in front of the ﬁ replace

The front plate must comply with national laws and regulations.

Contact your local building authorities regarding restrictions

and installation requirements.

For Norway: Minimum 300 mm in front of the door and width

at least the same as the door.

3.3 Walls

Distance to walls made of combustible material - see ﬁ g. 2.

The ﬁ replace may be used with a semi-insulated ﬂ ue pipe

provided the distances between the ﬁ replace and walls made

of combustible materials are as shown in Fig. 2.

NB: Ensure that furniture and other combustible materials are

not too close to the ﬁ replace. Combustible materials must not

be placed within 1,000 mm of the ﬁ replace opening.

3.4 Ceiling

If the ceiling above the ﬁ replace is made of combustible

material, the minimum distance between the ﬁ replace and

ceiling must be 700 mm, i.e. a minimum ceiling height of 2,400

mm.

4.0 Installation

NB: Before installing the ﬁ replace, check it carefully for any

signs of damage.

NB: The product is heavy! Ask someone to help you when

positioning and installing it.

NB: Read the installation and operating instructions for

Jøtul I 520 (cat. no. 10044945 and Jøtul S 71/S 72 (cat. no.

10047331) carefully before installing the ﬁ replace!

Use the provided acrylic sealant for all joints.

Then ﬁ t the steel chimney in accordance with the operating

instructions.

• The insert must be connected to a chimney and ﬂ ue

pipe approved for solid fuel ﬁ replaces with a ﬂ ue gas

temperature of 305°C.

• The cross-section of the chimney must be at least that of

the ﬂ ue pipe. Ø 150 mm cross section.

• Several solid fuel products can be connected to the same

chimney system if the chimney cross-section is adequate.

See “2.0 Technical data”.

For recommended chimney draught, see “2.0 Technical

Data”. If the draught is too strong, a smoke damper can

be installed and used to reduce the draught.

4.1 Prior to installation

The basic product comes in a package with concrete elements.

An insert (Jøtul I520) and a leg rack are also included.

NB: Check the product for signs of damage when you

unpack it.

NB: Check that the right insert is used for the selected

surround.

ENGLISH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Jotul S72 Seite 98

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info