oneself by icons.Press the start key,the treadmill begin to run, the speed change per 200m
by chosen programs.
6. Direct speed set
To operate the treadmill,select any key when the treadmill is nor in automatic adjusting
speed.The speed will be adjusted as selection speed.
7. Direct incline set
In nonautomatic state,when treadmill starts,selesting any key from the incline programs,it
will automatically adjust to the incline is selected.
8. Fast and Slow incline
Press the two buttons can adjust the fast and slow incline so as to change the incline of
treadmill.
9. Fast and Slow speed
These are the keys of hand control speed, they can speed up or speed down continuously,
adjusting the speed of treadmill by the two keys.The four jacks of electronic meter from left
to right,the third one is speed up and speed down induction hold in hand switch.This function
is shut by insert the plug of pulse sensor.
10. Volume increase 、Volume decrease
Under the condition of starting power amplifier,controlling the volume of loundhailer.
11. Pause and stop
During treadmill runs, first press stop key, the treadmill will stop and keep all data, if here
press start key, the treadmill will run as per original state; if press stop key in second time,
all data in the windows will become to zero.
12.Safety switch
Press this switch ,the treadmill stop running,all the windows flicker,here any operation is no
use.Circumgyrating the switch according to the direction shows ,the treadmill resume the
state before stopping.
TROUBLESHOOTING YOUR TREADMILL
The motorized treadmills are designed to be reliable and easy to use. However , if you
experience a problem, please reference the troubleshooting guide listed below.
PROBLEM: The console does not light up.
SOLUTION: Verify that the power cord is plugged in properly to the outlet, and that the
treadmill switch is turned on.
PROBLEM: The treadmill circuit breaker trips during a workout.
<8>
