5 Pause and stop During treadmill runs, first press stop key, the treadmill will stop
and keep all data, if here press start key, the treadmill will run as per original state;
if press stop key in second time, all data in the windows will become to zero.
6 Handle pulse sensor Two hands hold the pulse sensor, pulse
window display the instant pulse. ( The data has definite
differences according to individual habitus, this data is only for
reference.)
7. Overall mileage window: Press the ‘SET’ key exceeds 3 seconds
when the machine is in the stop state. The overall mileage will be
appeared in the time and distance windows, showing the distance
scope of 0000.000---9999.999km,press ‘stop’ key to exit.
DAILY MAINTENCE
1. Running board and running belt
● Brief:motorized treadmill use imported running belt, it’s with lower friction
coefficient, higher intensity of tension, the running board is specially with double
shock absorption system, it’s special smoothness and abrasion prevention.
● Clean Keep cleanness of treadmill, it can prolong treadmill’s life, please usually
clean the exposed running board both side of the running belt and foot board. Clean
the running belt by dipped soap water; please note not to let water flow into
machine and under the running belt.
2. Lubricating The running board/belt must be lubricated by special lubrication after
a period of use, suggestion: Treadmill works no more than 3 hours every week. It’s
lubricated one time every half of year. Treadmill works 3 to 6 hours every week.
It’s lubricated one time every 3 months. Treadmill works more than 6 hours every
week. It’s lubricated one time every month. Superfluous lubrication is not ok, it’s
not good with more lubrication, please remember: reasonable lubricating is a
important factor for prolonging treadmill’s life!
3. Clean Please eliminate the dust regularly after a period of use, to keep the power
panel and the head of the sensor clean.
4. Evaluation of friction The friction between running belt and board will be
increased as dust or reduced lubrication, this perhaps can harm motor, controller
increased friction is with following character:
(1) When shut off power of treadmill, the running belt can’t be moved or it’s difficult
for user to move by foot.
(2) Causing harm of motor of controller, open circuit and the fuse blows.
