To set the System Set-Up Mode, press the UP and DN keys
simultaneously and turn the power switch from OFF to ON.
Functions are selectable by pressing either the DN or UP keys.
Individual settings are explained later at each function. In this
mode, servos are not activated, but operating signals are
transmitting (only when the Tx module is in place). However, use
extra caution not to interfere with other frequencies. By pressing
the DN and UP keys simultaneously, you can return to the normal
display, which allows the servos to again operate.
Use either the UP
or DN key to scroll
through the menu
and access the
applicable function
System Set-Up Mode
Pg. 66 Information Display
Pg. 66 Model Selection and Copy Function
Pg. 67 Model Name Input
Pg. 68 Model Type Selection
Pg. 68 Data Reset
Pg. 69 Modulation Selection
Pg. 70 Data Transfer
Pg. 72 Input Selection –
Aux 2, channels can be used for gyro
sensitivity adjustment
3. System Set-Up Mode Functions
