HELI 72
Aux 2 (Channel #7) Input Selection
The Aux 2 Channel Input Selection Function allows you to select
which switch, pitch trim knob, or throttle hold switch will activate
the Aux 2 Function. If you are using the Aux 2 Function (channel
#7) for remote gyro sensitivity, JR TEC-1000 carburetor
operation, etc., this function should remain in the factory INH
position.
When using the Aux 2 Function for the gyro sensitivity, you can
change the rudder dual rate and the gyro sensitivity at the same
time. Conversely, if the throttle hold switch is selected, the gyro
sensitivity is changed only when the throttle hold is activated.
Press the UP and DN keys simultaneously and turn the power
switch ON to access the system Set-Up Mode. Using the UP
and DN keys, select Input Select Function and press the UP and
DN keys simultaneously to access.
3.11 Input Selection Function (System Set-Up Mode)
Aux 2 channel switch
assignment
Choices:
INH: Inhibit
Hold SW: Hold Switch
Pit. Trim: Pitch Trim
Knob
Gear Channel Switch Input
ACT: Active
INH: Inhibit
To Model Select
function
To Data Transfer
fucntion
Press either the
+ or - key to
select the switch
assignment or to
activate/inhibit
the Gear Switch
function
Press to change Aux 2
from INH to Hold Switch,
or to change gear from
INH to active
Press either key
to move the arrow
from Aux 2 to
Gear
Press the UP and DN keys
simultaneously to enter/exit the
System Set-Up Mode
Press the DN and Select keys
simultaneously to access the
System Mode info display
