Bedienungsanleitung Juki DDL8700B-7 (Seite 46 von 51) (Englisch)

614555

Zoom out

Zoom in

Vorherige Seite

1/51

Nächste Seite

– 44 –

1) Turn ON the power switch with switch ❻

and switch ❽ held pressed.

2) "KL.on" is displayed on indicator A with a blip to

make the key-lock function effective.

3) The panel returns to the normal operation after

displaying "KL.on" on the indicators.

4) While the key lock function is effective, "KL.on"

is displayed on the indicators when turning the

power ON.

5) When you carry out steps 1) to 3) in repetition, "KL.of" is displayed when turning the power ON and the

key lock function is rendered ineffective.

• "KL.on" display when turning the power ON

Display appears: The key lock function is effective.

Display does not appear: The key lock function is ineffective.

In the case the key lock function is effective, the operation of the panel will be as shown in the table below.

Switch operation of which is to be dis-

abled.

• Setting of the reverse feed stitching (❶, ❷, ❸ and ❹)

• Change of the sewing pattern (❺, ❻, ❼ and ❽)

• Change of the number of stitches (❾)

• Change of the sewing operation (󱀔, 󱀕, 󱀖 and 󱀗)

Switch operation of which is not to be

disabled.

• Compensating stitching in half-stitch steps (󱀓)

• Production support function (❼)

13. Selecting procedure of the key-lock function

Setting of the number of stitches for a pattern can be prohibited by enabling the key lock function.

❻

❽

Display section A

1) Referring to the explanation of "III-6. Setting of

functions" p.25, select function setting "n.95".

Then, press switch 󱀙.

2) Press and hold switch 󱀔.

3) The buzzer sounds after approximately one sec-

ond, and the setting data returns to the standard

setting value.

Do not turn OFF the power on the way

of initializing operation. Program of the

main unit may be broken.

4) Turn OFF the power switch and turn ON the power switch after closing the front cover. The machine re-

turns to the normal motion.

1. When you carry out the aforementioned operation, the neutral position correction value for

the pedal sensor is also initialized. It is therefore necessary to carry out automatic correc-

tion of the pedal sensor neutral position before using the sewing machine. (Refer "III-10.

Automatic compensation of neutral point of the pedal sensor" p.42.)

2. When you carry out the aforementioned operation, the machine-head adjustment values

and the function settings of the optional devices are also initialized. It is therefore neces-

sary to carry out adjustment of the machine head before using the sewing machine. (Refer

"IV-1. Adjusting the machine head" p.46.)

3. Even when this operation is performed, the sewing data set by the operation panel cannot

be initialized.

14. Initialization of the setting data

All contents of function setting can be returned to the standard set values.

󱀙

󱀔

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Juki DDL8700B-7 Seite 46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info