19
Setting the time
Pull the winding button out into position C. This stops the clockwork.
Please make sure that the seconds hand comes to a stop right above
the 60th second marker when stopping the clockwork if you would like
the time on your watch to be accurate to the second. Now turn the
winding button to the left. The date will be updated automatically to
the current date when the hour hand passes 12 pm. You can now con-
tinue turning the winding button to adjust the time accurately to the
minute. Press down the winding button again into position A to start
the seconds hand.
18
General instructions for use
Winding the watch
In the winding position (crown in Position A) the automatic movement
can also be wound by hand. 2-3 turns of the crown suffice to set the
movement in motion. It is better to wind the watch completely, as this
guarantees maximum accuracy and power reserve (including after
removal of the watch). The watch should be worn after winding in
order for the automatic winding mechanism to maintain a fully-wound
state (via the rotor movement).
Setting the date
Pull the crown to Position B (fast adjustment). The date can be altered
by turning the crown to the right. Rotate the crown until the date of
the previous day is displayed. (The actual date is then adjusted with
the setting of the time).
Important: Date alteration should not be performed between 8 PM
and 3 AM, as in this period the date is switched automatically by the
movement and damage may be caused to the switching mechanism.
If the month has less than 31 days, the date must be forwarded to the
1st of the following month by hand.
