Bedienungsanleitung Junker JB23UK50 (Seite 45 von 76) (Deutsch, Englisch, Holländisch, Französisch)

636499

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

Care and cleaning

With good care and cleaning, your oven will remain clean and

fully-functioning for a long time to come. Here we will explain

how to maintain and clean your oven correctly.

Notes

■ Slight differences in the colours on the front of the oven are

caused by the use of different materials, such as glass,

plastic and metal.

■ Shadows on the door panel which look like streaks, are

caused by reflections made by the oven light.

■ Enamel is baked on at very high temperatures. This can

cause some slight colour variations. This is normal and does

not affect their function. The edges of thin trays cannot be

completely enamelled. As a result, these edges can be

rough. This will not impair the anti-corrosion protection.

Cleaning agents

Damage to the various different surfaces caused by using the

wrong cleaning agent can be avoided by observing the

following instructions.

When cleaning the oven do not use

■ sharp or abrasive cleaning agents,

■ cleaning agent with a high alcohol content,

■ scouring pads,

■ high-pressure cleaners or steam jets.

■ Do not clean individual parts in the dishwasher.

Wash new sponges thoroughly before first use.

Cleaning the self-cleaning surfaces in the

oven

The back wall, roof and side walls of the oven are coated with

self-cleaning enamel. This coating absorbs and dispels

splashes from baking and roasting while the oven is in

operation. You will obtain a better result, the higher the

temperature and the longer the oven is in operation.

If soiling is still visible after several uses, proceed as follows:

1. First clean the oven floor.

2. Set the oven to Hot air " or Top/bottom heating %.

3. Heat the empty oven for approx. 2 hours at maximum

temperature.

The ceramic coating is regenerated. Brownish and black

residues can then be removed with water and a soft sponge.

Slight colour variations of the coating have no effect on the self-

cleaning function.

Caution!

■ Never use abrasive cleaners. This could scratch or damage

the highly porous surface coating.

■ Do not use oven cleaner on self-cleaning surfaces. If oven

cleaner is accidentally applied to these surfaces, wipe it away

immediately with a sponge and plenty of water.

Detaching and refitting the rails

The rails can be removed for cleaning. The oven must have

cooled down.

Unhooking the rails

1. Hold the shelf frames from underneath and pull slightly

forward. Pull the extension pins at the bottom of the rails out

of the mounting holes (Fig. A).

2. Then fold the rails upwards and carefully remove them

(Fig. B).

Stainless steel

fronts

Wipe with some washing-up liquid and a

damp cloth. Always wipe parallel to the natu-

ral grain. Otherwise, you may scratch the sur-

face. Dry with a soft cloth. Remove flecks of

limescale, grease, starch and albumin (e.g.

egg white) immediately. Do not use any abra-

sive materials, scouring sponges or rough

cleaning cloths. The stainless steel fronts can

be polished using a special care product. Fol-

low the manufacturer's instructions. You can

purchase special stainless steel cleaner from

our after-sales service or from specialist retail-

ers.

Enamel sur-

faces and lac-

quered

surfaces

Clean with some washing-up liquid and a

damp cloth. Dry with a soft cloth.

Knobs Clean with some washing-up liquid and a

damp cloth. Dry with a soft cloth.

Door glass Can be cleaned with glass cleaner. Do not

use any harsh cleaning agents or sharp metal

objects. These could scratch and damage the

surface of the glass panel.

Seal Clean with some washing-up liquid and a

damp cloth. Dry with a soft cloth.

Oven roof Clean with hot water or vinegar solution. For

heavy soiling: Only use oven cleaner on cold

surfaces.

Glass cover on

the oven light

Clean with some washing-up liquid and a

damp cloth. Dry with a soft cloth.

Accessories Soak in hot soapy water. Clean with a brush

or a sponge.

Aluminium

baking tray

(option)

Do not clean in the dishwasher. Never use

oven cleaner. To avoid scratches, never touch

the metal surfaces with a knife or similarly

sharp object. Clean horizontally with some

washing-up liquid and a damp glass cleaning

cloth or a microfibre cloth. Dry with a soft

cloth. Do not use any abrasive materials,

scouring sponges or rough cleaning cloths.

They could scratch the baking tray

Childproof

lock (option)

If a childproof lock has been fitted on the

oven door, it must be removed before clean-

ing. Soak all plastic parts in hot soapy water

and wash with a sponge. Dry with a soft cloth.

If very dirty, the childproof lock will not work

properly.

Hob Information on care and cleaning can be

found in the instruction manual for your oven.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Junker JB23UK50 Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info