Bedienungsanleitung Junker JD66BW50 (Seite 16 von 44) (Deutsch, Englisch, Holländisch, Französisch)

636935

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Cleaning the metal mesh grease filters

These instructions apply to several appliance variants. It is

possible that individual features are described which do not

apply to your appliance.

: Risk of fire!

Grease deposits in the grease filter may catch fire.

Clean the grease filter at least every 2 months.

Never operate the appliance without the grease filter.

Notes

■ Do not use any aggressive, acidic or alkaline cleaning

agents.

■ When cleaning the metal mesh grease filters, also clean the

holder for the metal mesh grease filters in the appliance

using a damp cloth.

■ The metal mesh grease filters can be cleaned in the

dishwasher or by hand.

By hand:

Note: You can use a special grease solvent for stubborn dirt. It

can be ordered via the Online Shop.

■ Soak the metal mesh grease filters in a hot soapy solution.

■ Clean the filters with a brush and then rinse them thoroughly.

■ Leave the metal mesh grease filters to drain.

In the dishwasher:

Note: If the metal mesh grease filters are cleaned in the

dishwasher, slight discolouration may occur. This has no effect

on the function of the metal mesh grease filters.

■ Do not clean heavily soiled metal mesh grease filters together

with utensils.

■ Place the metal mesh grease filters loosely in the dishwasher.

The metal mesh grease filters must not be wedged in.

Removing metal grease filter

1. Open the lock and fold down the metal grease filter.

When you do this, take hold of the metal grease filters from

underneath with your other hand.

2. Take the metal grease filter out of the holder.

Notes

■ Fat may accumulate in the bottom of the metal grease filter.

■ Hold the metal grease filter level to prevent fat from

dripping out.

3. Clean the metal grease filters.

Installing the metal mesh grease filter

1. Insert the metal mesh grease filter.

While doing this, place the other hand under the metal mesh

grease filter.

2. Fold the metal mesh grease filter upwards, locking it in place.

Trouble shooting

Malfunctions often have simple explanations. Please read the

following notes before calling the after-sales service.

: Risk of electric shock!

Incorrect repairs are dangerous. Repairs may only be carried

out and damaged power cables replaced by one of our trained

after-sales technicians. If the appliance is defective, unplug the

appliance from the mains or switch off the circuit breaker in the

fuse box. Contact the after-sales service.

Malfunction table

--------

Problem Possible cause Solution

The appliance

does not work

The plug is not

plugged in.

Connect the appliance to

the electricity supply

Power cut Check whether other

kitchen appliances are

working

Faulty fuse Check in the fuse box to

make sure that the fuse for

the appliance is OK

The lighting

does not work.

The bulbs are

faulty.

For information on chang-

ing the bulbs, see the

"Replacing Bulbs" section.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Junker JD66BW50 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info