Bedienungsanleitung Junker JM16GA52 (Seite 23 von 28) (Deutsch, Englisch)

636792

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

2. Press the ( grill button.

3. Set the cooking time using the rotary selector.

4. Press the Start button.

The cooking time counts down in the display.

The cooking time has elapsed

A signal sounds. Open the appliance door or press Stop. The

clock reappears.

Changing the cooking time

This can be done at any time. Change the cooking time using

the rotary selector.

Pausing

Press the Stop button once or open the appliance door.

Operation is suspended. The display above Start flashes. After

closing the door, press the Start button again.

Cancelling operation

Press the Stop button twice, or open the door and press the

Stop button once.

Note: You can also adjust the cooking time first and then the

microwave power setting.

Memory

You can save the settings for a dish in the memory and call it

up again at any time.

The memory is useful for if you frequently prepare a specific

dish.

Notes

■ You can also store grill only or grill combined with

microwave.

■ You cannot save several microwave power settings one after

the other.

■ You cannot save automatic programmes.

■ You can save the memory settings and start the appliance

immediately. When finishing, instead of pressing

i, press

Start.

■ Saving a new setting in the memory: press the ibutton. The

old settings appear. Save the new programme as described

in steps 1-4.

Saving memory settings

Example: 360 W, 25 minutes

1. Press the “i" button.

The indicator lamp lights up.

2. Press the required microwave power setting.

The selected power setting lights up and “1:00 min” appears.

3. Set the cooking time using the rotary selector.

4. Confirm by pressing the “i" button.

The clock reappears. The setting is saved.

Note: You can savve the memory settings nd start the

appliance immediately. When finishing, instead of pressing the

“

i" button, press Start.

Notes

■ You can also store grill only or grill combined with

microwave.

■ You cannot save several microwave power settings one after

the other.

■ You cannot save automatic programmes.

■ You can save the memory settings and start the appliance

immediately. When finishing, instead of pressing

i, press

Start.

■ Saving a new setting in the memory: press the ibutton. The

old settings appear. Save the new programme as described

in steps 1-4.

Adding to the memory

Press the "

i" button.

The old settings appear. Save the new programme as

described in points 1 to 4.

Notes

■ You cannot save several microwave power settings one after

the other.

■ You cannot save automatic programmes.

Starting the memory

It is very easy to start the saved programme. Place your meal

into the appliance. Close the appliance door.

1. Press the "i" button.

The saved settings are displayed.

2. Press the Start button.

The cooking time counts down in the display.

 

























 

6WRS



6WDUW



























Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Junker JM16GA52 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Junker JM16GA52

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info