Bedienungsanleitung Junker JM26AA52 (Seite 20 von 28) (Deutsch, Englisch)

636787

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Cooling fan

The appliance is equipped with a cooling fan. The fan may run

on even if the oven has been switched off.

Notes

■ The cooking compartment remains cold during microwave

operation. The cooling fan will still switch on. The fan may run

on even when microwave operation has ended.

■ Condensation may appear on the door window, interior walls

and floor. This is normal and does not adversely affect

microwave operation. Wipe away the condensation after

cooking.

Memory

You can save the settings for a dish in the memory and call it

up again at any time.

The memory is useful for if you frequently prepare a specific

dish.

Saving memory settings

Example: 360 watts, 25 minutes

1. Press the i button.

The indicator light above the button lights up.

2. Press the required microwave power setting.

The indicator light above the button lights up and 1:00 min

appears in the display.

3. Set the cooking time using the rotary selector.

4. Confirm by pressing the i button.

The clock reappears. The setting is saved.

Note: You can save the memory settings and start the

appliance immediately. When finishing, instead of pressing

press Start.

Adding to the memory

Press the "

i" button.

The old settings appear. Save the new programme as

described in points 1 to 4.

Notes

■ You cannot save several microwave power settings one after

the other.

■ You cannot save automatic programmes.

Starting the memory

It is very easy to start the saved programme. Place your meal

into the appliance. Close the appliance door.

1. Press the "i" button.

The saved settings are displayed.

2. Press the Start button.

The cooking time counts down in the display.

The cooking time has elapsed

A signal sounds. Open the appliance door or press Stop. The

clock reappears.

Pausing

Press the Stop button once or open the appliance door.

Operation is suspended. The display above Start flashes. After

closing the door, press the Start button again.

Cancelling the setting

Press the Stop button twice, or open the appliance door and

press the Stop button once.

Changing the signal duration

You will hear a signal when the appliance is switched off. You

can change the duration of the acoustic signal.

Press the Start button for approx. 6 seconds.

The new signal duration is adopted.

The clock reappears.

The following are possible:

Short signal duration - 3 tones

Long signal duration - 30 tones.

Care and cleaning

With careful care and cleaning your microwave oven will retain

its looks and remain good order. We will explain here how you

should care for and clean your appliance correctly.

: Risk of short circuit!

Never use high-pressure cleaners or steam cleaners to clean

the oven.

: Risk of burns!

Never clean the appliance immediately after switching off. Let

the appliance cool down.

: Risk of electric shock!

Do not immerse the appliance in water or clean under a jet of

water.

















Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Junker JM26AA52 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Junker JM26AA52

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info