636490
47
Zoom out
Zoom in
Vorherige Seite
1/116
Nächste Seite
Accessories / Services
6 720 645 817 (2010/09)
47
7.1.2 Neutralising system no. 1606
The neutralising system no. 1606 comprises a plastic
casing with a chamber to hold the neutralising granulate,
a back-up area for the neutralised condensate and a
level-controlled condensate pump with a head of
approx. 2.0 m. No. 1606 enables the neutralisation of
condensate volumes from systems with up to approx.
850 kW rated output. The neutralising system no. 1606
is equipped with a stand-alone 230 V power supply.
Fig. 28
1 Connection plug
2 Condensate inlet (DN 20, 3/4" hose fitting)
3 Condensate drain (DN 20, 3/4" hose fitting)
4 Neutralising agent
5 Condensate pump
6 Pressure switch for starting and stopping the condensate
pump plus additional pressure switch for switching off the
burner if the max. level has been exceeded
7 Condensate chamber
Condensate pump
The amount of condensate determines the head of the
condensate pump.
The graph shows the heat of the neutralising system
no. 1606 subject to the pump rate.
Fig. 29
H Delivery head
V Flow rate
7.1.3 Condensate lifting system no. 1620
The condensate lifting system no. 1620 was designed for
installation inside condensing boilers where corrosive
condensate according to the DWA Code of Practice
ATV-DVWK-A 25 is generated. The materials used in the
system permit the routing of condensate with a pH value
2.4 without any problem. For oil or gas condensing
boilers with an output > 200 kW, install the lifting system
downstream of the neutralising system.
The drive unit can be reversed on top of the tank and
thereby enables a variable supply and drain
arrangement.
The fully wired lifting system is equipped with a
standard alarm contact (NC/NO) for connection to a
condensing boiler or to an alarm controller.
6 720 619 379-60.1O
0,0
0,5
1,0
1,5
2,0
2,5
5550454035302520151050
H
/ m
V
/ l/min
.
6 720 619 379-62.1O
.
No. 1620
Loaded condensate (pH 2.4) permissible
Power supply V 1~230
Connected load P
1
kW 0.08
Rated current A 0.8
Mains frequency Hz 50
Cable length, system to
controller / plug
m 2
Maximum media temperature °C 80
Pressure connection mm 12
Inlet connection mm 19/24
IP rating IP20
Gross volume l 1.5
Weight kg 2
Tab. 25 Specification condensate lifting system no. 1620
47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Junkers MKB 560-3 A wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info