24
4 Permanent settings in programming mode
T Press the ‘Pc’ button.
T Press the
‘>’ button several times until ‘4/5’ is displayed.
T Press the
‘Switch off after’ button.
‘Switch off after’
T Press the ‘<’ or ‘>’ button to change the switch-off time.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘4/5’
T Press the ‘’ button to exit programming mode.
The harder the water is, the more frequently the JURA needs to be
descaled. It is therefore important to set the water hardness accu-
rately.
The water hardness was set when the machine was first used. You
can change this setting at any time.
The water hardness can be adjusted on a continuous scale between
1 °dH and 30 °dH.
T Press the
‘Pc’ button.
T Press the
‘>’ button several times until ‘5/5’ is displayed.
T Press the
‘Water hardness’ button.
‘Water hardness’
T Press the ‘<’ or ‘>’ button to change the setting for the
water hardness.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘5/5’
T Press the ‘’ button to exit programming mode.
In the programme item
‘4/5’ / ‘Rinse the milk system’ you can make
the following settings:
U
‘Manual’: You are prompted to perform milk system rinsing
10minutes after preparation of a speciality coffee with milk.
U
‘Automatic’: The milk system rinsing is automatically initiated
10minutes after preparation of a speciality coffee with milk.
Example:Proceed as follows to set the milk system rinsing to be
initiated automatically 10 minutes after the preparation.
Setting the water
hardness
Milk system rinsing
