44
2 Preparation
2 Preparation
E You can stop preparation of a speciality
coffee, speciality coffee with milk or hot
water at any time. To do this, touch
‘Cancel’.
E After a speciality coffee is selected and
during grinding, the coffee strength is
briefly displayed. You can change the
coffee strength by touching the display
(
‘<’ or ‘>’). The next time you prepare
this product, this coffee strength setting
will be used.
E During preparation you can change the
amount of water by touching
‘<’ or ‘>’.
This setting is not saved.
E You can follow the current status of
preparation on the display.
Coffee tastes best served hot. A cold porcelain cup
cools the beverage – and impairs the taste. We
therefore recommend prewarming the cups. The
full coffee aroma can develop only in prewarmed
cups. You can purchase a JURA cup warmer from
your specialised dealer.
Ways of preparing a beverage
The IMPRESSA offers various ways of preparing a
speciality coffee, milk foam or hot water:
U
Preparation using the start screen: Simply
touch the desired product on the display (start
screen).
The following products are displayed as stan-
dard on the start screen:
U
‘Cappuccino’
U
‘Latte macchiato’
U
‘Espresso’
U
‘Coffee’
U
Preparation using the product selector view:
Only some of the products you can prepare
are shown on the start screen. As soon as you
touch the
‘^’ box (bottom left), more
products are displayed in a product selector
view.
Move your fi nger from left to right (or vice
versa) across the touchscreen display until
the desired product is displayed. Then touch
‘Prepare’ to start preparation.
The following additional products are shown
in the product selector view:
U
‘Ristretto’
U
‘2 ristretti’
U
‘2 espressi’
U
‘2 coffees’
U
‘Hot water’
U
‘Milk foam’
U
‘Latte Macchiato Doppio’
U
‘Cappuccino doppio’
E The product selector view disappears
automatically after 10seconds if no
preparation is started.
E You have the option of replacing the four
products on the start screen with your
personal favourites (see Chapter 4 ‘Perma-
nent settings in programming mode –
Replacing products on the start screen’).
Please note that the descriptions provided in
the following sections always refer to the
default settings.
Ristretto, espresso and coffee
Example:Proceed as follows to prepare one coffee.
Precondition:The start screen is displayed.
T Place a cup under the coffee spout.
T Touch
‘Coffee’.
Preparation starts. The preset amount of
water for coffee flows into the cup.
Preparation stops automatically. Your
IMPRESSA is once more ready for use.
2 ristretti, 2 espressi and 2 coffees
There are several ways of preparing two speciality
coffees.
U
When preparing a single product:
U
As soon as you start preparing a single
product,
‘2x’ is displayed in the bottom right
of the display. Touch
‘2x’ to prepare the
double product.
