7
Ⅲ Then fill the water tank and reinstall it. Make sure to install the
tank properly, it must engage audibly.
2.4 Fill coffee beans
To ensure that your machine will work perfectly for a long
time and to avoid damage, please note that the grinding gear
of your JURA coffee machine is not suitable for coffee beans
which were treated, during or after roasting, with additives
(e.g. sugar). Such coffee blends may damage the grinding
gear. Any repair costs resulting from the use of such blends
are not covered by warranty.
Ⅲ Open the bean tank cover (10) and remove the aroma preser-
vation cover (11).
Ⅲ Remove any dirt or foreign matter from the bean tank.
Ⅲ Fill coffee beans in the bean tank and close the cover.
2.5 Adjusting the grinding gear
You can adjust the grinding gear to the roast of your coffee. We
recommend
a fine grinding degree Ǟ for bright roasts (the smaller the dots,
the finer the grinding)
a coarse degree Ǟ for dark roasts (the larger the dots, the
coarser the grinding)
The grinding degree may only be adjusted while the grinding
gear is running.
Ⅲ Open the bean tank cover (10) and remove the aroma preser-
vation cover (11).
Ⅲ To adjust the grinding degree, turn the rotary switch (Fig. 2) to
the required position.
2.6 Power switch
Actuate the power switch (19) on your IMPRESSA
E10/20/25 before using the machine for the first time.
We recommend that you switch off your IMPRESSA
E10/20/25 with the power switch (19) if you intend not to
use the machine for longer periods of time (e.g.during holi-
days).
3. First use
Upon first commissioning or after a service, the system
needs to be filled. The system filling operation works prop-
erly only if NO Claris plus filter is inserted. Please do not
insert it before the system is filled and
lights up.
Ⅲ Fill coffee beans in the bean tank (Fig. 2).
Ⅲ Switch on the IMPRESSA E10/20/25 using the ON/OFF key
(6).
Ⅲ lights up
Ⅲ Fill the water tank (8) with fresh water.
Ⅲ lights up
Ⅲ Place an empty cup under the replaceable hot water jet (14).
Ⅲ Open the steam / hot water draw-off tap (12) (Fig. 13).
Ⅲ flashes
Ⅲ lights up
Ⅲ Close the steam / hot water draw-off tap (12).
Ⅲ flashes
Ⅲ lights up
Ⅲ Press the maintenance key (4).
Ⅲ Machine carries out a rinsing operation.
E
