13
Before CLOSE TAP water may still escape the system.
12. Drawing off steam
To ensure perfect operation, clean the 2-stage frothing jet
(16) regularly. Screw the jet off as described. Hold the jet at
the top and at the bottom end and screw it apart (Fig. 18).
Thoroughly rinse the 3 parts under running water.
Make sure the nozzle has engaged properly. If the nozzle is
clogged with dried milk or has not been attached properly, it
might suddenly come off during operation.
Install the replaceable 2-stage frothing jet (Fig. 6). This is
included in your Welcome Pack. Do not replace the re-
placeable steam/hot water jet (16) directly after drawing off
steam, because the jet is hot after the draw-off operation.
Steam can be used for heating liquids and frothing milk for
cappuccino. Make sure that the replaceable steam/frothing jet
(16) is pushed upwards when liquids are heated. To froth
liquids, push the 2-stage frothing jet downwards, turning it
slightly.
During frothing some water will escape the system before
the actual frothing process. This does not affect the result,
e.g. when frothing milk.
At the start of the steam draw-off operation there can be
splashing The steam jet becomes hot. Avoid direct contact
with the skin!
Ⅲ READY
Ⅲ Place a cup under the 2-stage frothing jet (16) and immerse it in
the milk to be frothed or the liquid to be heated.
Ⅲ Press the steam pre-selection key (7).
Ⅲ HEATING
Ⅲ STEAM
Ⅲ To draw off steam, open the steam/hot water draw-off tap (15)
(Fig. 13).
Ⅲ The illuminated ring (2) is active.
Ⅲ You can adjust the steam draw-off time individually by turning
the Rotary Switch (1) until the required SEC are displayed.
Ⅲ For example, 35 SEC
Ⅲ If you do not change the steam draw-off time settings using the
Rotary Switch (1), the machine will use the settings last adjusted
Ⅲ During the steam draw-off operation, the message STEAM is
displayed
Ⅲ When the steam quantity is reached, the message SHUT TAP is
displayed
Ⅲ Close the steam / hot water draw-off tap (15).
Ⅲ READY
Before SHUT TAP, steam may still escape the system.
The machine is ready for steam draw-off for 40 seconds, i.e.
within this period you can draw off steam, stop the operation
and activate it again without having to heat the machine up
again. When the time has expired, press the steam pre-selec-
tion key (7) again.
13. Drawing off steam using
the Professional Cappuccino Frother (option)
The Professional Cappuccino Frother is optionally available.
Contact your authorized dealer.
E