14
13.1 Connecting the Professional Cappuccino
Frother to your IMPRESSA E80/85
Ⅲ Disassemble the replaceable hot water jet (Fig. 5) or the
replaceable 2-stage frothing jet (Fig. 6).
Ⅲ Mount the Professional Cappuccino Frother (Fig. 7)
Ⅲ Press one side of the hose into the opening behind the dial
(Fig. 10)
The optionally available milk container can be used for
sucking in milk. How to connect it (see Fig. 8).
13.2 Drawing off cappuccino and hot milk using
Professional Cappuccino Frother
Ⅲ Fill the milk container with milk or immerse the hose in the milk
directly.
Ⅲ Place a cup under the Professional Cappuccino Frother (Fig. 8)
Ⅲ Press the steam pre-selection key (7).
Ⅲ HEATING
Ⅲ STEAM
Ⅲ To draw off steam open the steam/hot water draw-off valve (15)
(Fig. 13).
Ⅲ The illuminated ring (2) is active.
Ⅲ You can adjust the steam draw-off time individually but turning
the Rotary Switch (1) until the required SEC are displayed.
Ⅲ For example: 35 SEC
Ⅲ If you do not change the steam draw-off time settings using the
Rotary Switch (1), the machine will use the settings last adjusted
Ⅲ For cappuccino turn the selector switch (1) (Fig. 9) to area (2)
Ⅲ For hot milk turn the selector switch (1) (Fig. 9) to area (3)
Ⅲ Now place the cup with the cappuccino froth or the hot milk un-
der the coffee spout and draw of the product of your choice.
13.3 Cleaning the Professional Cappuccino Frother
The Professional Cappuccino Frother must be cleaned after
each draw-off operation.
Ⅲ Fill water in a container and immerse the hose in it.
Ⅲ Draw off steam until the water/steam mixture is clean.
Ⅲ If necessary, disassemble the Professional Cappuccino Frother
and thoroughly rinse the flow regulation with water (Fig. 16 and
Fig. 17)
For proper cleaning, use the JURA Auto Cappuccino Clean-
ing Agent This is available at your authorized dealer. The
instructions for use you’ll find on the agent. Daily cleaning is
recommended.
14. Switching off the IMPRESSA E80/85
Ⅲ READY
Ⅲ Switch off your IMPRESSA E80/85 using the ON/OFF key
(8).
Ⅲ RINSE
Ⅲ An automatic rinsing operation is started.
15. Programming
When your IMPRESSA E80/85 leaves the factory it is adju-
sted such that you can draw off coffee without having to
change any settings. However, you can programme various
parameters individually.
You can programme the following stages:
¼ Filter
¼ Hardness
¼ Aroma
¼ Auto-off
