15
The IMPRESSA will not prompt you to clean the Profes-
sional Cappuccino Frother.
The JURA Auto-Cappuccino Cleaner is available from
stockists.
Ⅲ Place a container under the Professional Cappuccino Frother
(Fig. 9).
Ⅲ Fill a second container with 250 ml of fresh water and add one
capful of Auto-Cappuccino Cleaner.
Ⅲ Immerse the milk pipe into the container with the Auto-Cappuc-
cino Cleaner (Fig. 9).
Ⅲ READY
Ⅲ Press the steam pre-selection key (8).
Ⅲ HEATING
Ⅲ STEAM
READY
Ⅲ To draw off steam open the steam/hot water draw-off valve
(Fig 13).
Ⅲ Draw steam until the container with the Auto-Cappuccino
Cleaner is empty.
Ⅲ This procedure cleans the Professional Cappuccino Frother and
the milk pipe.
Ⅲ Close the steam/hot water draw-off valve.
Ⅲ STEAM
READY
As long as STEAM READY os on view in the display, the
machine is ready to dispense steam.
Ⅲ Fill the container with 2.5 dl of fresh water.
Dip the milk pipe into the container with the fresh water.
When READY appears in the display, press the steam prese-
lect key (8) again to set the machine in readiness for the
steam function.
Ⅲ To draw off steam, open the steam/hot water draw-off valve
(Fig. 13).
Ⅲ Draw off steam until the container with the fresh water is empty.
During this procedure the Professional Cappuccino Frother (15)
and the milk pipe are rinsed with fresh water.
Ⅲ Cleaning of the Professional Cappuccino Frother is now com-
plete and your IMPRESSA is ready for use.
14. Switching off the IMPRESSA
To ensure perfect operation, please switch your IMPRESSA
to standby mode with the (3) symbol first. Then switch
the machine off with the power switch (21).
Ⅲ READY
Ⅲ Switch off the IMPRESSA using the ON/OFF key (3).
Ⅲ RINSING
Ⅲ An automatic rinsing operation is started.
15. Programming
When your IMPRESSA leaves the factory it is adjusted such
that you can draw off coffee without having to change any
settings. However, you can programme various parameters
individually.
You can programme the following stages:
¼ Filter
¼ Water hardness
¼ Aroma
¼ Temperature
E
