8
2.3 Power switch
Actuate the power switch (21) on your IMPRESSA before
using the machine for the first time.
We recommend that you switch off your IMPRESSA with
the power switch (21) if you intend not to use the machine
for longer periods of time (e.g.during holidays)
3. Preparing the coffee machine for use
3.1 Check the mains voltage
The coffee machine is preset in the factory to the correct mains
voltage. Check if your local mains supply voltage complies with
the information given on the type plate on the underside of the
coffee machine.
3.2 Check electrical fuse
The coffee machine is designed for an electric current of 10
Ampères. Check if the electrical fuse has sufficient capacity.
3.3 Refill water
Only use fresh, cold water. Never fill in milk, mineral water
or other liquids.
Ⅲ Take out the water tank and thoroughly rinse it with cold tap
water (Fig. 1).
Ⅲ Then fill the water tank and re-install it in the coffee machine.
Make sure the tank is installed correctly and that it engages
properly.
3.4 Filling the bean tank
To ensure that your machine will work perfectly for a long
time and to avoid damage, please note that the grinding gear
of your JURA coffee machine is not suitable for coffee beans
which were treated, during or after roasting, with additives
(e.g. sugar). Such coffee blends may damage the grinding ge-
ar. Any repair costs resulting from the use of such blends are
not covered by warranty.
Ⅲ Open the cover of the bean tank (10).
Ⅲ Remove any dirt or foreign matter from the bean tank.
Ⅲ Fill coffee beans in the bean tank and close the cover.
3.5 Adjusting the grinding gear
You can adjust the grinding gear to the roast of your coffee. We
recommend that you use
a fine adjustment Ǟ (the smaller the dots, the finer the
grinding is) for a light roast
a coarse adjustment Ǟ (the bigger the dots, the coarser the
grinding is) for a dark roast
The grinding degree may only be adjusted while the grinding
gear is running.
Ⅲ Open the cover of the bean tank (10).
Ⅲ To adjust the grinding degree turn the rotary switch (Fig. 2) to
the required position.
4. First use
Ⅲ Fill coffee beans in the bean tank (10).
Ⅲ Fill water tank.
Ⅲ Switch on your coffee machine using the key .
Ⅲ WWW.IMPRESSA-F-LINE.COM
