12
Ⅲ Immerse the frothing nozzle (21) into the milk you want to froth
or into the liquid you want to heat up. Turn selector switch for
coffee or hot water / steam (19) to the symbol .
Ⅲ To draw off steam open the steam/hot water draw-off valve (19).
Ⅲ STEAM INTAKE
Ⅲ To stop steam-function turn selector switch for coffee or hot wa-
ter / steam (19) back to the symbol .
After drawing off steam immediately draw off approx. 1dl of
water and clean the outside of the nozzle with a cloth.
If you want to draw off steam several times, the selector key
for steam can be left on. The drawing off of steam is on
stand-by-status. If you draw off steam only once, then the
selector switch for steam should be turned off by pressing
the selector key anew.
When steam is first drawn off, there is a possibility of spat-
tering. The pivoting nozzle becomes hot. Avoid direct
contact with the skin.
11. Drawing off steam using
the Profi-Auto-Cappuccino/Caffè Latte (option)
The Profi-Auto-Cappuccino/Caffè Latte is optionally avail-
able. Contact your authorized dealer.
11.1 Connecting the Profi-Auto-Cappuccino/Caffè
Latte to your IMPRESSA S85
Ⅲ Disassemble the replaceable hot water nozzle or the replaceable
steam/frothing nozzle.
Ⅲ Mount the Profi-Auto-Cappuccino/Caffè Latte (Fig. 10)
Ⅲ Press one side of the hose into the opening behind the dial
(Fig. 12)
The optionally available milk container can be used for
sucking in milk.
11.2 Drawing off cappuccino and hot milk using
Profi-Auto-Cappuccino/Caffè Latte
Ⅲ Fill the milk container with milk or immerse the hose in the milk
directly.
Ⅲ Place a cup under the Profi-Auto-Cappuccino/Caffè Latte.
Ⅲ Press selector key for steam . Wait until the flashing of the
lamp turns into a constant light.
Ⅲ To draw off steam open the steam/hot water draw-off valve (19).
Ⅲ STEAM INTAKE
Ⅲ To stop steam-function turn selector switch for coffee or hot wa-
ter / steam (19) back to the symbol .
Ⅲ For cappuccino turn the selector switch (1) (Fig. 12) to area (2).
Ⅲ For hot milk turn the selector switch (1) (Fig. 12) to area (3).
To increase the heat turn the selector switch (1) (Fig. 12)
to area + To reduce the heat, turn the selector switch to
area –.
Ⅲ Now place the cup with the cappuccino froth or the hot milk
under the coffee spout and draw of the product of your choice.
11.3 Cleaning the Profi-Auto-Cappuccino/Caffè Latte
The Profi-Auto-Cappuccino/Caffè Latte must be cleaned
after each draw-off operation.
Ⅲ Fill water in a container and immerse the hose in it.
Ⅲ Draw off steam until the water/steam mixture is clean.
Ⅲ If necessary, disassemble the Profi-Auto-Cappuccino/Caffè Latte
and thoroughly rinse the flow regulation with water (Fig. 11).
For proper cleaning, use the JURA Auto Cappuccino Clean-
ing Agent This is available at your authorized dealer. The
instructions for use you’ll find on the agent. Daily cleaning is
recommended.
