15
13.8 Programming automatic switch on time
A programming of the timer clock is necessary if an auto-
matic switch on is needed.
Ⅲ UNIT ON –.–
Ⅲ Press key .
Ⅲ By briefly pressing key or you can set the hours and then
confirm by pressing key .
Ⅲ By briefly pressing key or you can set the minutes and
then confirm by pressing key .
Ⅲ You can call up the next setting by pressing key .
To switch off the automatic timer proceed as follows:
Press key
Press key
UNIT ON —:—
13.9 Programming automatic switch off time
Ⅲ OFF AFTER 5.0 HOURS
Ⅲ Press key
Ⅲ By briefly pressing key or you can set the hours and then
confirm by pressing key (0.5 to 9.0 hours).
Ⅲ You can call up the next setting by pressing key .
13.10 Cup counter
Ⅲ 200 SUPPLIED (TOTAL SUPPLIED)
Ⅲ To obtain the information press the required key. The display
will show you the number of times the function has been chosen.
Ⅲ You can call up the next setting by pressing key .
It is not possible to call up hot water and steam supplies.
13.11 Programming language selection
Ⅲ Press key
Ⅲ By briefly pressing key or call up the language desired
and then confirm by pressing key .
Ⅲ By pressing key you can leave the programming modus or
you can call up the next setting by pressing key .
13.12 Program key
By using key you can set back the following settings (powder
quantity, coffee temperature, water quantity) to their original stan-
dard settings.
Ⅲ COFFEE READY
Ⅲ Press key until you can hear an acoustic signal.
If a mistake occurs while programming one of the above
settings, just press key and the chosen setting moves back
to its original standard setting.
14. Care and maintenance
14.1 Fill water
Ⅲ FILL WATER
Ⅲ If this message shows on the display no more coffee can be
drawn off. Top up water.
The water tank should be rinsed and filled with fresh water
daily. Only use fresh, cold water. Never top up with milk,
mineral water or any other liquids. You can top up water
without removing tank.
