12
Ⅲ Place a cup under the steam/frothing nozzle (20) and immerse
the frothing aid in the milk to be frothed or the liquid to be
heated.
Ⅲ Press steam portion draw-off key .
Ⅲ STEAM PORTION
Ⅲ You can stop the draw-off operation at any time by pressing the
steam draw-off key .
Ⅲ COFFEE READY
11. Connecting the Profi-Auto-Cappuccino/
Caffè Latte to the X90/X95
Ⅲ Disassemble the replaceable hot water nozzle or the replaceable
steam/frothing nozzle.
Ⅲ Mount the Profi-Auto-Cappuccino/Caffè Latte (Fig. 10).
Ⅲ Press one side of the hose into the opening behind the dial
(Fig. 11).
The optionally available milk container can be used for
sucking in milk. How to connect it (Fig. 11).
11.1 Drawing off cappuccino and hot milk with
Profi-Auto-Cappuccino/Caffè Latte
Ⅲ Fill the milk container with milk or immerse the hose in the milk
directly.
Ⅲ Place a cup under the Profi Auto Cappuccino/Caffè Latte (21).
Ⅲ Press the steam portion draw off key
Ⅲ STEAM PORTION
Ⅲ The frothing/heating time depends on the steam portion settings
you have programmed. (See “Programming steam portion”
Chapter 13.4)
Ⅲ For cappuccino turn the selector switch (1) (Fig. 13) to area
(2)
Ⅲ For hot milk turn the selector switch (1) (Fig. 13) to area (3)
To increase the heat turn the selector switch (1) (Fig. 13)
to area (+) To reduce the heat turn the selector switch to
area (–).
Ⅲ Now place the cup with the cappuccino froth or the hot milk
under the coffee spout and draw of the product of your choice.
11.2 Cleaning the Profi-Auto-Cappuccino/
Caffè Latte
The Profi-Auto-Cappuccino/Caffè Latte (21) must be cleaned
after each draw-off operation. Daily cleaning is recom-
mended.
Ⅲ Fill water in a container and immerse the hose in it.
Ⅲ Draw off steam until the water/steam mixture is clean.
Ⅲ If necessary, disassemble the Profi-Auto-Cappuccino/Caffè Latte
and thoroughly rinse the flow regulation with water (Fig. 11 and
Fig. 12).
For proper cleaning, use the Jura Auto Cappuccino Cleaning
Agent which is available at your authorized dealer.
12. Switching off machine
When the machine is switched off, the rinsing program is auto-
matically run again. Therefore place an empty container under
the coffee-spout (15) and press ON/OFF key . When the rinsing
water has run into the container, the machine powers down. Dis-
card the water.
