HANKS strongly recommends using certified fuel in its stoves (DINplus
e
Ö-Norm M7135).
The use of fuel of inferior quality or not conforming to the specification given above compromises the
running of your stove and can therefore lead to the termination of the guarantee and of the manufacturer's
responsibility for the product.
HANKS pellet stoves run exclusively on pellets with a diameter of 6 mm (only for Italy) and 6-8 mm
(European countries) with lengths that go from 5 mm to 30 mm.
2.2. PRECAUTIONS FOR INSTALLATION
IMPORTANT!
Installation and assembly of the stove must be carried out by qualified personnel.
The stove must be installed in a suitable position to allow the normal operations of opening and ordinary maintenance.
The site must be:
capable of providing the environmental conditions for operation
equipped with power supply 230V 50 Hz
capable of taking an adequate system for smoke discharge
provided with external ventilation
provided with an earth connection complying with CEI
The stove must be connected to a flue pipe or an internal or external vertical duct conforming to current
standards UNI 7129 - 7131 9615. The stove must be positioned in such a way that the electrical plug is
accessible.
IMPORTANT!
The stove must be connected to a flue pipe or a vertical duct which can discharge the fumes at the
highest point of the building. The fumes are however derived from the combustion of wood products, and if
they come into contact with or close to walls, they can make dirty marks. Also take care because the fumes
are very hot but almost invisible, and can cause burns on contact. The holes for the passage of the smoke
pipe and for the intake of air from outside should be made before positioning the stove unit.
